XVape Napalm Detonator

XVape's guidance for this device is to clean the chamber and the mouthpiece after every use. The ceramic oven is the part that needs the most care, because cracking it through hard scrubbing or impact is the usual cause of a unit that stops heating properly. The magnetic mouthpiece and its ceramic filter come apart by hand, and the scraping tool you need is built into the device.

Quick Cleaning (After Each Session)

1. Let it cool, then scrape: Pull the built in scraping tool out and clear the spent material from the ceramic oven while it is still slightly warm.
2. Brush the chamber: Sweep the ceramic walls and base with the supplied brush so nothing bakes on during the next session.
3. Wipe the mouthpiece: A cotton swab and an alcohol wipe through the inner parts keeps the draw open. Do not soak the ceramic mouthpiece.

Deeper Cleaning (Every Few Sessions)

1. Take the filter out: Lift the ceramic filter off the magnet cap so you can reach both sides of it.
2. Soak the filter: Put it in a glass of isopropyl alcohol until the residue lifts, then finish with a cotton swab and let it dry completely before refitting.
3. Swab the ceramic oven: Use a swab dampened with isopropyl alcohol and scrub the sides and base in a circular motion. XVape is explicit that you must never fill the chamber with alcohol or any cleaning liquid.
4. Change the oven screen if it is clogged: Push the long brush up through the intake hole in the base to dislodge the old screen, then seat the new one with the side tabs facing up towards the oven opening and press it home with the brush or the stir tool.
5. Clean the water pipe adapter separately: The ceramic adapter soaks in alcohol like the filter. Rinse and dry it fully.

Care Tips for Better Results

• Use a medium, even grind and a moderate pack. A tightly packed conduction oven gives a tight draw and uneven extraction. See our grind guide.
• Keep all the material inside the ceramic oven. Anything sitting on the rim ends up in the filter.
• Be gentle with the oven. Cracks from aggressive cleaning or a hard knock are the main cause of weak heating on this platform, and they are not covered by warranty.
• Use the concentrate pad rather than putting wax straight into the chamber, and clean straight after a concentrate session.
• For general technique, read our guide on how to clean a dry herb vaporizer.

The Napalm Detonator makes sense for someone who wanted the XVape Aria anyway and likes the collaboration styling. The ceramic oven, isolated airpath and by-degree control are a lot of device for the money, which is why the Aria platform keeps turning up in our budget portables picks, and the fact that it takes both flower and concentrate makes it a reasonable single device for people who switch between the two. The grenade case, water pipe adapter and spare parts also mean you are not buying accessories separately, and the included ceramic adapter opens up water pipe use out of the box.

The trade-offs are the same as the Aria's. Conduction means the ceramic oven wall does the heating, so the grind and the pack matter more than they would on a convection device, as covered in our convection vs conduction explainer and our packing guide. There is no airflow adjustment, the cell is sealed in, and charging is micro USB rather than USB-C. Concentrate support is real but limited: XVape allows waxes on a pad and explicitly rules out oils and liquids, which our guide on vaping concentrates in a dry herb vaporizer explains. Being a limited run, it also costs more than a plain Aria and is harder to find.