Guide
Ball Vape Media: Ruby, Zirconia, SiC, Diamondium and Every Other Ball
18 November 2026 • 18 min read
What the balls in a ball vape really do, and how ruby, zirconia, silicon carbide, Diamondium, quartz, glass and steel compare on stored heat, recovery, airflow and price.

This guide contains affiliate links. If you buy through one, Thermal Extractions may earn a commission at no extra cost to you. That never decides what we recommend.
The balls in a ball vape are a heat battery. They soak up heat from the coil or torch and hand it to the air you pull through them, so the material decides how much heat is waiting for each draw and how quickly it comes back. Synthetic ruby is the default because it stores more heat per cubic centimeter than any other ceramic in common use. Zirconia is heavier but holds less, and it suits torch-heated portables. Silicon carbide recovers fastest and stores about 30% less than ruby. Diamondium is JCVAP's name for moissanite, which is single-crystal silicon carbide: a jewel-grade version of the same material that costs two and a half to four and a half times as much as ruby. Quartz and borosilicate glass hold roughly half what ruby does.
The longer version is worth reading, because a few things product pages say about ball media are backwards. Heavier balls don't hold more heat. Diamondium doesn't out-store ruby. And how well a ball conducts heat matters less on the draw than you'd think. If the hardware itself is new to you, start with what a ball vape is and come back. Ball vapes are flower hardware, and nothing here applies to nicotine e-cigarettes or 510 oil cartridges.
Contents13 sections
- What the Balls Actually Do
- Heat per Thimbleful: The Number That Matters Most
- Ruby and Sapphire: The Default for Good Reasons
- Zirconia: Heavy, Tough and Built for the Torch
- Silicon Carbide: Quick to Heat, Quick to Recover
- Diamondium: Moissanite in a Ball Vape
- Quartz and Borosilicate Glass: Half the Heat, Fewer Worries
- The Outsiders: Steel, Alumina and Silicon Nitride
- Size and Shape Matter as Much as Material
- Swapping Media Without Regret
- Which Media Should You Run?
- Frequently Asked Questions
- The Bottom Line
What the Balls Actually Do
A ball bed has three jobs. It stores heat between draws. It passes that heat to the air during a draw, which takes surface area. And it refills from the heater afterward, which means heat has to travel from the hot wall of the head into the middle of the pile. The material affects all three, but not equally, and not always in the way the marketing suggests.
Start with the part that gets overrated: how fast heat moves inside each ball. At ball vape sizes it barely matters. A 3mm zirconia ball, one of the poorest conductors in the hobby, evens out from core to surface within about a second, and a ruby ball does it in a small fraction of that. A draw lasts several seconds, so every material here gives up its heat about as fast as the air can carry it away. What separates them during the draw is how much heat each cubic centimeter holds and how much surface the bed shows the air.
Conductivity earns its keep in the third job. Between draws, heat crosses from the titanium wall into the bed one ball at a time, through tiny contact points and the air gaps around them. A bed of good conductors passes it inward faster, so it soaks sooner and recovers quicker. The air gaps do most of the resisting, which makes the real difference between materials smaller than their datasheets suggest, but it's real, and it's why zirconia and glass feel slow to come back while silicon carbide feels quick.
Note: "Heat retention" on a product page can mean two different things: how much heat the balls store, or how slowly they lose it. A dense ball that conducts poorly can stay hot for a long time while storing less heat than a lighter one.
Heat per Thimbleful: The Number That Matters Most
Every head has a fixed volume, so the useful comparison is heat stored per cubic centimeter. Not per gram, and not density on its own. We calculated it for each material from room temperature up to a 600°F (316°C) set point, using NIST-JANAF heat capacity data and typical densities from manufacturer datasheets. Plain zirconia and crystalline quartz stand in for their stabilized and fused forms, and steel and borosilicate use typical published values, so treat the percentages as close rather than exact. The temperature range matters: ruby's specific heat climbs by about 40% between room temperature and 600°F, so room-temperature figures undersell every material here.
| Material | What it is | Density (g/cm³) | Heat held per cm³ at 600°F, vs ruby | Conductivity at room temp (W/m·K) | Where you'll find it |
|---|---|---|---|---|---|
| Ruby and sapphire | Synthetic corundum (aluminum oxide) | 3.98 | 100%, about 1.1 kJ | 27 to 35, about 13 by 400°C | Flowerpot B-ZERO, Universal Baller, Ruby Twist, Crown, Joystik |
| Stainless steel | Iron alloy | 7.9 | About 105% | 16 | Mad Heaters' optional Tempest balls |
| Zirconia | Zirconium oxide, stabilized with yttria | 5.7 to 6.1 | About 80% | 2 to 3 | Tempest and Tempest 2 |
| Silicon carbide | SiC ceramic made from powder | 3.1 to 3.2 | About 70% | 120 to 160, lower when hot | Herbcloud Crown and Poby Ember upgrades, Tempest option |
| Diamondium | Moissanite, single-crystal SiC | 3.21 | About 73% | 120 to 490, by grade | JCVAP Diamondium pearls |
| Quartz | Fused silica glass | 2.2 | About 50% | 1.3 | MiniNail Flower Wand option, Tempest option, terp pearls |
| Borosilicate glass | Lab glass | 2.23 | About 50% | About 1.1 | Budget refills, early Tempest extras |
Ruby sits at the top of the practical list, which is why nearly every coil-heated desktop uses it. Steel edges it on paper, and we'll come to why almost nobody bothers.
The bigger surprise is that weight tells you almost nothing. Zirconia is about half again as dense as ruby, but each gram holds only a little over half as much heat, so the same space stores about a fifth less. Mad Heaters lists the fill weight for every ball it sells for the Tempest cap: 4.1g of zirconia or 2.8g of ruby. By our numbers the ruby fill, a third lighter, holds about a quarter more heat.
Ruby and Sapphire: The Default for Good Reasons
Ruby balls are synthetic corundum: crystalline aluminum oxide with a trace of chromium that turns it red. Leave the chromium out and you have sapphire, which behaves identically on the coil. Natural gemstones don't come into it. Synthetic corundum has been cheap since Auguste Verneuil announced his flame-fusion process in 1902, and by 2000 the method was producing about 250 metric tons a year. Precision ruby balls are an ordinary industrial part. They're the most common tip on the probes of coordinate measuring machines, according to Quality Magazine, and they turn up in chemical pump check valves and gauging sets.
Corundum is the best all-rounder in the table. It stores the most heat of the ceramics, conducts well, is chemically inert, rates 9 on the Mohs scale and melts at 2,040°C per Crystran's sapphire datasheet, which is far beyond any set point. Its conductivity falls as it heats, from roughly 27 to 35 W/m·K at room temperature to around 13 at 400°C per Roditi's figures, but that's still about five times what zirconia manages.
Ruby also changes color with heat. Britannica notes that ruby turns green at high temperature and goes back to red as it cools. At ball vape temperatures you only see the start of that shift, as the stones darken, and Terp Chasers Club built a feature around it: the Universal Baller has a glass screen on top so you can look at the rubies, and once they've darkened the head is up to temperature.
Ruby's weak spot is sudden change. It handles steady heat easily but can crack if something cold hits it while it's hot, and JCVAP warns against cleaning hot pearls or putting a flame straight onto them. Cannabis Hardware's routine for its heads is the safe one: let the rubies cool, soak them in 90% or stronger isopropyl for about 30 minutes, rinse with hot water, and dry them fully before they go back in.
Between ruby and sapphire there's nothing to choose thermally. Ruby is the usual pick for ball heads, and the darkening gives you a free readiness check.
Gem-cut rubies
Not every head uses spheres. Vapvana's Screwball holds around 750 gem-cut rubies, and SZ Crossing's original Ruby Wireless housing about 520. A sphere has the least surface for its volume of any shape, so facets add surface for the air to work against. The cost is airflow: the less round the particles, the more twisted the path through the bed and the harder the draw. SZ Crossing's WOHW V2 housing swapped them for round 3mm ruby balls specifically to open up the pull. Gem-cut heads also tend to run cooler, and Vapvana recommends 450°F to 525°F for the Screwball, about 100°F below where a B-ZERO's spheres usually sit. JCVAP sells faceted 2mm "Ruby Gems" in packs of 600 if you want to try them in another head.
Zirconia: Heavy, Tough and Built for the Torch
Zirconia is zirconium oxide stabilized with a little yttria, the same ceramic used for white kitchen knives and dental crowns. Its other big job is as a thermal barrier coating in gas turbines, where it's used because heat moves through it slowly. In a ball vape that cuts both ways.
Mad Heaters fills both Tempests with it: 2.5mm balls in the original and 3mm in the Tempest 2. A torch-heated portable lives a hard life. You heat it from outside once per bowl, it rattles around in a pocket, and sooner or later it gets dropped. Zirconia's toughness suits that, and slow recovery hardly matters when there's no coil sitting under the head waiting to top it up. It still stores about 80% of ruby's heat in the same space.
The low conductivity shows up as patience. Heat from a torch or an induction coil takes longer to reach the middle of the bed, so give it the full heat-up: Mad Heaters' starting point for the YLL 3.0 induction heater with the stock balls is 80W for 35 to 40 seconds. Zirconia's toughness against knocks also doesn't extend to sudden temperature changes. Morgan's datasheet for 3Y-TZP zirconia rates it for a sudden change of about 200°C, so a hot cap and a splash of cleaning fluid don't mix.
Silicon Carbide: Quick to Heat, Quick to Recover
In 1891 Edward Acheson was trying to make artificial diamonds by heating clay with powdered coke. He got hard blue crystals instead, and named them carborundum because he believed they were a compound of carbon and aluminum, the metal in corundum. Silicon carbide went on to become the grit on sandpaper and grinding wheels, kiln shelving, ceramic brake discs and the chips in modern power electronics.
The black SiC pearls sold for ball vapes are a ceramic made from powder rather than a single crystal. Dense sintered SiC such as Saint-Gobain's Hexoloy runs about 125 W/m·K at room temperature and 77 W/m·K at 400°C, roughly six times what ruby manages at that temperature. Pearl sellers quote similar room-temperature figures: Mad Heaters lists 120 W/m·K for its Tempest balls and JCVAP 160 for its 2mm pearls. The catch is storage: a cubic centimeter of SiC holds about 70% of what the same space of ruby does.
So a SiC bed heats up fastest, recovers fastest between draws, and has less in reserve for one long pull. That suits heads that stay on their heater, like a PID-coil desktop or JCVAP's battery-powered Herbcloud, where the heater keeps refilling the bed as you draw. It suits a heat-once torch head or a lift-off wireless head less well, because stored heat is all those get. JCVAP prices SiC as the upgrade: the Herbcloud Crown is $156 with ruby pearls and $169 with SiC at regular prices.
Diamondium: Moissanite in a Ball Vape
Diamondium, which you'll also see typed as "diamontium", is JCVAP's trade name for moissanite. JCVAP describes it as single-crystal silicon carbide in the 6H crystal form. Chemically it's the same compound as the black SiC pearls; the difference is that each Diamondium pearl is cut from one continuous crystal instead of being sintered from powder.
The name comes from Henri Moissan, who found tiny crystals in fragments of the Canyon Diablo meteorite in Arizona in 1893. He took them for diamond at first and identified them as silicon carbide in 1904, and the mineral was named after him the following year. Natural moissanite is vanishingly rare, so everything sold is lab-grown, the same material sold in jewelry as a diamond alternative. It's harder than corundum, at about 9.25 on the Mohs scale.
JCVAP sells it in grades. Grade A is clear and the purest. Grade B is slightly less pure with cyan or champagne tints. Grade D is black, which JCVAP attributes to lower purity, and shows green or orange flashes under light. Here's what a full 300-pearl fill of 2mm media costs at JCVAP's regular prices as of November 18, 2026:
| 300 x 2mm pearls at JCVAP | Regular price |
|---|---|
| Ruby | $26.34 |
| Silicon carbide | $37.00 |
| Diamondium Grade D | $68.85 |
| Diamondium Grade A (sold for the Crown Cap) | $119.55 |
Thermally, Diamondium is SiC. It stores the same heat per cubic centimeter, a few percent more thanks to its slightly higher density, which still leaves it well short of ruby. Conductivity is where the crystal is supposed to shine, and a pure single crystal does conduct two to three times better than good sintered SiC. JCVAP's own numbers muddy that, though: it lists 120 to 150 W/m·K for Grade D Diamondium, against 160 for its ordinary 2mm SiC pearls. Either way, as the first section showed, a 2mm SiC ball is already effectively uniform inside, and the bottleneck in a bed is the contact points and air gaps between balls, which a better crystal can't change. Expect Diamondium to behave like a very good SiC bed: quick to heat, quick to recover, with a bit less in reserve than ruby.
JCVAP's own product copy says Diamondium's "low specific heat capacity coupled with high conductivity yields fastest heating of any vaporization surface." That's a fair claim about heat-up. Low heat capacity is also another way of saying it stores less. The listings variously call it a single crystal and a "sophisticated nanocrystal", which aren't the same thing; the single-crystal description is the one that matches moissanite.
It's still a striking material, no grade changes how much heat it stores, and a head full of Grade D pearls is a fun experiment for anyone with a JCVAP head. Just buy it for the material, not in the hope that it'll out-hit ruby.
Quartz and Borosilicate Glass: Half the Heat, Fewer Worries
Fused quartz is pure silica glass, the same material as a quartz banger. It holds about half what ruby does per cubic centimeter and conducts poorly, at about 1.3 W/m·K, but it barely expands when heated, so it shrugs off sudden temperature changes that would crack ruby or zirconia, and it doesn't soften until about 1,665°C, per the figures collected on Wikipedia's fused quartz page. MiniNail sells the Flower Wand with either quartz or ruby pearls. Quartz is the cheaper option and ruby holds heat harder between draws, which is just what the table predicts. Mad Heaters also sells quartz balls for the Tempest, at 1.4g per cap fill against 2.8g of ruby.
Borosilicate is Pyrex-style lab glass and stores about the same as fused quartz. It's the most fragile option here. Borosilicate tolerates a sudden temperature change of about 170°C and is typically rated for working temperatures up to about 500°C, and it softens at 820°C. That's enough margin for most ball vape set points, but a torch can push a small head well past it if you linger. Mad Heaters offered glass balls as an extra for the original Tempest, and the care advice for the Tempests is that glass balls shouldn't see extreme heat.
What you get for the lost heat is a cheaper, lighter, inert bed, and hits that taper off sooner, which is a feature if you like to sip. Skip decorative craft beads, though. Most are soda-lime glass, which cracks with a temperature change of only about 40°C, and many are coated or painted.
The Outsiders: Steel, Alumina and Silicon Nitride
Stainless steel stores about as much heat per cubic centimeter as ruby and conducts it well, at about 16 W/m·K. Mad Heaters sells stainless balls for the Tempest, at 5.6g per cap fill. Almost nobody else does. Steel is heavy, it discolors with heat, and most of the hobby would rather fill the bed with ceramic or crystal.
Alumina is ruby's chemistry in polycrystalline white form. A dense 99.5% technical grade comes in at about 3.9g/cm³ and 30 W/m·K per CoorsTek, so thermally it's almost indistinguishable from ruby, and it's sold cheaply as grinding media. We haven't found a ball vape that ships with it. If you experiment, stick to dense high-purity grades. Lower-purity balls and the "inert" support balls used in chemical reactors can be porous, and a porous ball soaks up resin.
Silicon nitride is the ceramic in hybrid bearings. Morgan's sintered silicon nitride comes in at 3.24g/cm³ and 28 W/m·K, and is rated for sudden temperature changes of 900°C, more than four times what its zirconia tolerates. On paper that's SiC-like storage with ruby-like conduction and shock resistance second only to quartz. It's a hobbyist swap, though, not something any maker ships.
Size and Shape Matter as Much as Material
Cannabis Hardware says the B-ZERO head takes roughly 100 rubies at 3mm or 40 at 4mm. Both fills are about 1.4 cubic centimeters of ruby, so they store the same heat. But the 3mm fill shows the air about 28 square centimeters of surface against 20 for the 4mm, around 40% more. That's the trade in every head: halving the ball diameter doubles the surface in the same space, and by the standard packed-bed equations it makes a normal draw roughly two to three times harder to pull. The Universal Baller's 1,000 2mm rubies show about 125 square centimeters of crystal to every draw, though most of that comes from a bed three times the B-ZERO's size rather than from the smaller balls, and the bigger bed also stores three times the heat.
A few practical rules follow:
- Don't go smaller than the screens retain. A ball smaller than the mesh was sized for ends up in your bowl and your glass.
- Don't mix sizes in one bed. Small balls slip into the gaps between big ones, so a mixed bed packs denser and draws tighter than its average ball size suggests.
- Fill to just under the screen and leave a little play. Mad Heaters' advice for the Tempest is to stop tightening while the balls can still shift slightly.
Tip: The cooling balls in a stem or water pipe do the opposite job. The five cooling balls under the 2-Con's mouthpiece take heat out of the vapor rather than putting it in, and JCVAP even sells zirconia as "cooling pearls". At room temperature, every material on this page is a heat sink.
Swapping Media Without Regret
- Expect to re-find your temperature. A set point that works with one material won't land the same with another. Mad Heaters publishes different induction wand settings for each ball type it sells, so start low and work up.
- Never let liquid touch hot media. Ruby, zirconia and glass can all crack from thermal shock. Cool first, then clean.
- Clean cold, dry fully. A 30-minute soak in 90% isopropyl and a hot rinse covers ruby, zirconia, SiC, quartz and glass. Trapped alcohol flashes off on the next heat-up, so let everything dry completely.
- Inspect at every clean. Cannabis Hardware's advice is to replace any ball that's cracked or discolored.
- Buy media sold for vaping, or dense technical ceramic. Craft beads, garden pebbles and unknown "ceramic balls" may be porous, glazed, painted or soda-lime glass.
Which Media Should You Run?
| Your setup | Best media | Why |
|---|---|---|
| Coil-heated desktop, big one-hit clears | Ruby | Most stored heat per cubic centimeter, good conduction, cheap |
| PID or battery heater, back-to-back draws | Silicon carbide | Recovers fastest when the heater keeps feeding it |
| Torch or induction portable | Zirconia | Tough, holds about 80% of ruby's heat, slow recovery doesn't matter |
| Gentler, sippier hits or the cheapest refill | Quartz or borosilicate | Half the heat, inert, light |
| You want the prettiest bed on the table | Diamondium | Single-crystal SiC, behaves like SiC, costs a lot more |
When in doubt, run what the maker designed the head around. The set points, screens and heat-up times on a device page assume the stock media.
Frequently Asked Questions
Is Diamondium better than ruby in a ball vape?
Not for stored heat. Diamondium is single-crystal silicon carbide, which holds about 73% of ruby's heat per cubic centimeter. It heats up and recovers faster, so it suits a head that stays on its heater, but it won't give a lift-off or torch-heated head more in reserve.
Is diamontium the same thing as Diamondium?
Yes. Diamondium is JCVAP's trade name for moissanite, and "diamontium" is a common misspelling. There's no separate material by that name.
Are the rubies in a ball vape real rubies?
They're real corundum, chemically the same as a natural ruby, but grown in a lab. Synthetic corundum is cheap and consistent, and ruby balls are a standard industrial part.
Does the ball material change the flavor?
None of the ceramics or crystals here give anything off at ball vape temperatures, and the balls never touch your herb. What changes the taste is how hot the air arrives and how fast the bed gives up its heat, which is why swapping media usually means finding a new set point.
Can I mix different ball materials?
You can, but there's little to gain. The bed behaves like an average of the two, the materials heat and recover at different rates, and you lose the clean comparison that tells you whether a swap helped. If you do, keep the balls the same size.
How often should ball vape balls be replaced?
Rarely. Dense ceramics and crystals don't wear out with heat. Clean them when they darken or the draw tightens, and replace any that crack or stay discolored after a soak. Mad Heaters' cleaning schedule for the Tempest has the balls coming out roughly every 300 bowls.
The Bottom Line
Ruby is the default for good reason: it stores the most heat of any ceramic in common use, conducts it well, and costs very little. Zirconia trades storage and recovery for toughness, which is the right trade for a torch-heated portable. Silicon carbide recovers fastest and suits heads that stay on their heater. Diamondium is the same silicon carbide grown as a gem, beautiful and expensive and no better at holding heat. Quartz and glass are the gentle, cheap end of the scale. Whatever you run, size and fill matter as much as material, and the best ball vaporizers list is where the current hardware picks live.
About the author
Practical context from the editor behind this guide.