PAX 3

The PAX 3 draws vapor from its stainless steel oven up through a narrow internal tube to the silicone mouthpiece, and that tube is where most of the residue collects. Conduction also bakes material against the oven walls and the screen at the base of the chamber, so both discolor quickly even when the oven looks empty.

1. Brush out while warm: Tip the spent load out after a session and sweep the oven and the underside of the oven lid with the included wire brush while the device is still warm. Residue lifts much more easily then than once it has cooled and set.

2. Lift the mouthpiece: Slide a fingernail or the multi-tool under the lip of the flat or raised mouthpiece and lift it out. Wipe the recessed channel it sits in with a cotton bud and isopropyl alcohol, because that groove is what makes the mouthpiece feel sticky and stop seating cleanly. In our review this was one of the more common complaints from owners.

3. Push the screen out: Feed a pipe cleaner down the vapor path from the mouthpiece end to pop the oven screen out of the bottom of the chamber. If the tube is clogged badly enough that the screen will not shift, stiffer wire will free it.

4. Soak the small parts: Both mouthpieces, the oven screen and the concentrate insert can sit in isopropyl alcohol for thirty minutes to an hour. Warm soapy water works but is slower and leaves more behind. Rinse and dry everything fully before it goes back on.

5. Keep the lids dry: PAX is explicit that neither the standard oven lid nor the half pack lid should ever be submerged in liquid. Clean both with a damp cotton swab only, working around the magnets and the rim.

6. Floss the vapor path: Dip a fresh pipe cleaner in isopropyl and work it back and forth through the tube several times. Wipe the oven walls and the top of the body the same way, keeping alcohol away from the button and charging contacts.

7. Dry, then burn off: Reassemble only once every part is dry, then run one full cycle at the highest temperature with an empty oven to clear any alcohol left in the path.

A full clean every five to ten loads keeps the draw open, and PAX suggests the routine every few uses. Screens are consumable and sold in threes, so swap one out once it stays dark after soaking. Keep the magnetic pads on the charging dock clean, and charge the device standing upright so oils do not creep toward the mouthpiece. Oven discoloration is permanent and does not affect heating.

The PAX 3 excels for group sessions with its easy pass-around design and haptic feedback, making it great for beginners and experienced users alike. Ideal for outdoor adventures with its durable construction and long battery life, this portable vaporizer is one of the most recognizable devices on the market.

The dual-use capability for both dry herbs and concentrates makes it versatile, though primarily designed for flower. Understanding optimal temperatures helps you get the most from the PAX 3's preset modes. The app offers additional customization for advanced users, and the device is featured among the easiest vaporizers to clean thanks to its minimal components.

For a more budget-friendly option, check out the PAX 2 which offers similar design at a lower price point.