Price (USD)
XMAX V3 Nano edgeSticky Brick OG Brick
$180
XMAX V3 Nano
$50
XMAX V3 Nano is typically around $130 lower.
Vaporizer Comparison
Sticky Brick OG Brick vs XMAX V3 Nano
Sticky Brick OG Brick
VS
XMAX V3 Nano
Side-by-side specs, pricing context, and clear decision guidance.
Editorial Summary
Sticky Brick OG Brick and XMAX V3 Nano are both convection / portable vaporizers, but they target different priorities. XMAX V3 Nano is usually the lower-cost pick at $50, around $130 below Sticky Brick OG Brick. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
20
Different Specs
20
Shared Specs
0
Overall Overlap
0%
Shared Traits
Convection Portable
Head-to-Head Highlights
A quick snapshot of the specs people usually care about first.
Weight
Close callSticky Brick OG Brick
—
XMAX V3 Nano
50g
Weight is close enough that portability is likely similar.
Key Differences at a Glance
Top specs where these two devices diverge.
Price (USD)
Sticky Brick OG Brick
$180
vs
XMAX V3 Nano
$50
Temperature Range
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
200 - 220C (single temp setting)
Battery Type
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
Internal (non-swappable)
Battery Capacity
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
1000mAh
Charge Time
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
~50 minutes
Width
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
2cm
Height
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
13.5cm
Weight
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
50g
Capacity
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
~0.1g
Chamber Material
Sticky Brick OG Brick
—
vs
XMAX V3 Nano
Stainless steel
Choose Sticky Brick OG Brick if...
- Your usage leans toward wood and analog sessions.
- You prefer Sticky Brick OG Brick's overall feature mix and form factor.
- You prefer Sticky Brick OG Brick's overall feature mix and form factor.
Choose XMAX V3 Nano if...
- You want the lower listed entry price ($50 vs $180).
- Your usage leans toward budget and electronic sessions.
- You prefer XMAX V3 Nano's overall feature mix and form factor.
Spec Comparison Table
Direct comparison of every spec from each device profile.
20 differ 0 shared
| Specification | Sticky Brick OG Brick | XMAX V3 Nano |
|---|---|---|
| Price (USD) | $180 | $50 |
| Temperature Range | — | 200 - 220C (single temp setting) |
| Battery Type | — | Internal (non-swappable) |
| Battery Capacity | — | 1000mAh |
| Charge Time | — | ~50 minutes |
| Width | — | 2cm |
| Height | — | 13.5cm |
| Weight | — | 50g |
| Capacity | — | ~0.1g |
| Chamber Material | — | Stainless steel |
| Charging | — | USB-C |
| Display Type | — | None |
| Haptic Feedback | — | Yes |
| Heating Time | — | 30 seconds |
| Manufacturer | — | TopGreen Technology Co |
| Name | — | V3 Nano |
| Run Time | — | 5-6 sessions |
| Session Time | — | 3 minutes |
| Thickness | — | 2cm |
| Type | — | Hybrid (primarily convection) |
Comparison FAQs
What is the biggest difference between the Sticky Brick OG Brick and the XMAX V3 Nano?
The biggest practical difference is price tier: the XMAX V3 Nano sits at $50 while the Sticky Brick OG Brick is $180, a gap of about $130 that puts them in different buying brackets.
Which is cheaper, the Sticky Brick OG Brick or the XMAX V3 Nano?
XMAX V3 Nano is the cheaper option at $50 compared with $180 for the Sticky Brick OG Brick, about $130 less. Live retailer pricing can shift, so confirm before buying.
Is the Sticky Brick OG Brick or the XMAX V3 Nano better for microdosing?
Sticky Brick OG Brick is the better fit for microdosing in our database, typically thanks to a smaller chamber, finer temperature control, or both.
Need a different matchup?
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.