Price (USD)
XVape Lanza edgeXMAX Starry V3
$100
XVape Lanza
$50
XVape Lanza is typically around $50 lower.
Vaporizer Comparison
XMAX Starry V3
XVape Lanza
Side-by-side specs, pricing context, and clear decision guidance.
XMAX Starry V3 and XVape Lanza are both conduction / portable vaporizers, but they target different priorities. XVape Lanza is usually the lower-cost pick at $50, around $50 below XMAX Starry V3. XVape Lanza has the quicker listed heat-up profile, which can matter for shorter sessions.
Specs Compared
19
Different Specs
16
Shared Specs
3
Overall Overlap
16%
Shared Traits
A quick snapshot of the specs people usually care about first.
XMAX Starry V3
$100
XVape Lanza
$50
XVape Lanza is typically around $50 lower.
XMAX Starry V3
~30 seconds
XVape Lanza
~15 seconds
XVape Lanza has the quicker listed heat-up profile.
XMAX Starry V3
Conduction
XVape Lanza
Conduction
Both devices use a similar heating approach.
Top specs where these two devices diverge.
Price (USD)
XMAX Starry V3
$100
XVape Lanza
$50
Heat Up Time
XMAX Starry V3
~30 seconds
XVape Lanza
~15 seconds
Temperature Range
XMAX Starry V3
212°F - 464°F
XVape Lanza
180°C - 220°C (356°F - 428°F)
Battery Type
XMAX Starry V3
18650
XVape Lanza
—
Battery Capacity
XMAX Starry V3
2900mAh
XVape Lanza
1000mAh
Battery Life
XMAX Starry V3
60-80 minutes
XVape Lanza
—
Charging
XMAX Starry V3
Micro USB
XVape Lanza
USB-C
Charge Time
XMAX Starry V3
90-120 minutes
XVape Lanza
—
Pass-Through Charging
XMAX Starry V3
Yes
XVape Lanza
—
Dimensions
XMAX Starry V3
11 x 3.5 x 2.4 cm
XVape Lanza
—
Direct comparison of every spec from each device profile.
| Specification | XMAX Starry V3 | XVape Lanza |
|---|---|---|
| Price (USD) | $100 | $50 |
| Heating Type | Conduction | Conduction |
| Heat Up Time | ~30 seconds | ~15 seconds |
| Temperature Range | 212°F - 464°F | 180°C - 220°C (356°F - 428°F) |
| Battery Type | 18650 | — |
| Battery Capacity | 2900mAh | 1000mAh |
| Battery Life | 60-80 minutes | — |
| Charging | Micro USB | USB-C |
| Charge Time | 90-120 minutes | — |
| Pass-Through Charging | Yes | — |
| Dimensions | 11 x 3.5 x 2.4 cm | — |
| Power Adjustment | — | Preset - 5 Stages |
| Auto Shut Off | — | Yes |
| Chamber Material | Ceramic | Ceramic |
| Display Type | OLED | RGB LED Light Bar |
| Haptic Feedback | Yes | — |
| Manufacturer | TopGreen Technology Co | TopGreen Technology Co |
| Replaceable Battery | Yes | — |
| Session Timer | — | 3 / 5 minutes |
There's no single headline gap. The differences are spread across 16 smaller spec rows rather than concentrated in one place. The spec table below marks each row that differs.
XVape Lanza is the cheaper option at $50 compared with $100 for the XMAX Starry V3, about $50 less. Live retailer pricing can shift, so confirm before buying.
XVape Lanza reaches session-ready temperature in ~15 seconds, while the XMAX Starry V3 takes ~30 seconds. That's roughly 15 seconds quicker on the XVape Lanza, which is useful if you want shorter, on-demand sessions.
Yes, only the XMAX Starry V3 supports pass-through charging. The XVape Lanza has to finish charging before you can use it.
XVape Lanza charges over USB-C; the XMAX Starry V3 uses a Micro USB port. USB-C means one fewer cable to keep around if your phone and laptop already use it.
Across the 19 specs we line up, they share 3 and differ on 16, an overlap of about 16%. The differences are concentrated in the areas the spec table highlights with a marker.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.