Price (USD)
XMAX V3 Nano edgeVapvana Screwball
$299
XMAX V3 Nano
$50
XMAX V3 Nano is typically around $249 lower.


Side-by-side vaporizer comparison including specs, pricing context, and decision guidance.
Vapvana Screwball and XMAX V3 Nano are both electronic / convection vaporizers, but they target different priorities. XMAX V3 Nano is usually the lower-cost pick at $50, around $249 below Vapvana Screwball. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
26
Different Specs
26
Shared Specs
0
Overall Overlap
0%
Shared Traits
Quick snapshot of the specs people usually care about first.
Vapvana Screwball
$299
XMAX V3 Nano
$50
XMAX V3 Nano is typically around $249 lower.
Vapvana Screwball
—
XMAX V3 Nano
50g
Weight is close enough that portability is likely similar.
Top specs where these two devices diverge.
Price (USD)
Vapvana Screwball
$299
XMAX V3 Nano
$50
Temperature Range
Vapvana Screwball
450F-525F (Recommended Range)
XMAX V3 Nano
200 - 220C (single temp setting)
Battery Type
Vapvana Screwball
—
XMAX V3 Nano
Internal (non-swappable)
Battery Capacity
Vapvana Screwball
—
XMAX V3 Nano
1000mAh
Charge Time
Vapvana Screwball
—
XMAX V3 Nano
~50 minutes
Width
Vapvana Screwball
—
XMAX V3 Nano
2cm
Height
Vapvana Screwball
—
XMAX V3 Nano
13.5cm
Weight
Vapvana Screwball
—
XMAX V3 Nano
50g
Ball Type
Vapvana Screwball
~750 2.5mm Gem Cut Rubies
XMAX V3 Nano
—
Bowl Capacity
Vapvana Screwball
0.1 - 0.4g
XMAX V3 Nano
—
Direct comparison of shared and unique specifications from each device profile. (26 differences, 0 overlaps)
| Specification | Vapvana Screwball | XMAX V3 Nano |
|---|---|---|
| Price (USD) diff | $299 | $50 |
| Temperature Range diff | 450F-525F (Recommended Range) | 200 - 220C (single temp setting) |
| Battery Type diff | — | Internal (non-swappable) |
| Battery Capacity diff | — | 1000mAh |
| Charge Time diff | — | ~50 minutes |
| Width diff | — | 2cm |
| Height diff | — | 13.5cm |
| Weight diff | — | 50g |
| Ball Type diff | ~750 2.5mm Gem Cut Rubies | — |
| Bowl Capacity diff | 0.1 - 0.4g | — |
| Capacity diff | — | ~0.1g |
| Chamber Material diff | — | Stainless steel |
| Charging diff | — | USB-C |
| Coil Size diff | 25mm | — |
| Display Type diff | — | None |
| Haptic Feedback diff | — | Yes |
| Heating Time diff | — | 30 seconds |
| Housing Material diff | Titanium | — |
| Joint Size diff | 18mm | — |
| Manufacturer diff | — | TopGreen Technology Co |
| Name diff | — | V3 Nano |
| Run Time diff | — | 5-6 sessions |
| Screen Size diff | 20mm | — |
| Session Time diff | — | 3 minutes |
| Thickness diff | — | 2cm |
| Type diff | — | Hybrid (primarily convection) |
Neither is universally better. Vapvana Screwball fits some priorities, while XMAX V3 Nano fits others. This side-by-side comparison highlights the tradeoffs so you can choose based on your own use-case.
XMAX V3 Nano is listed lower ($50) compared with Vapvana Screwball ($299), but live retailer pricing can change.
Published heat-up data differs by source, so practical session feel may matter more than one raw number.
Jump into the full comparison hub to pick any two devices and open a canonical side-by-side page.