Price (USD)
Stache Terp Tap edgePuffco Peak Pro
$450
Stache Terp Tap
$180
Stache Terp Tap is typically around $270 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Puffco Peak Pro
Puffco $450
Stache Terp Tap
Stache $180
Puffco Peak Pro and Stache Terp Tap are both desktop / concentrates vaporizers, but they target different priorities. Stache Terp Tap is usually the lower-cost pick at $180, around $270 below Puffco Peak Pro. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
31
Different Specs
30
Shared Specs
1
Overall Overlap
3%
Shared Traits
A quick snapshot of the specs people usually care about first.
Puffco Peak Pro
$450
Stache Terp Tap
$180
Stache Terp Tap is typically around $270 lower.
Puffco Peak Pro
376 grams (base)
Stache Terp Tap
~3400g (7.5 lbs), glass cup a further 230g
Puffco Peak Pro is the lighter listed unit.
Puffco Peak Pro
Conduction (3DXL Chamber, heated ceramic side walls)
Stache Terp Tap
Conduction (510 thread cartridge or screw-in coil)
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Puffco Peak Pro
$450
Stache Terp Tap
$180
Heating Type
Puffco Peak Pro
Conduction (3DXL Chamber, heated ceramic side walls)
Stache Terp Tap
Conduction (510 thread cartridge or screw-in coil)
Battery Type
Puffco Peak Pro
Internal, sealed
Stache Terp Tap
Internal rechargeable
Charging
Puffco Peak Pro
USB-C and Qi wireless
Stache Terp Tap
USB-C
Dimensions
Puffco Peak Pro
63 x 63 x 155mm base, ~240mm assembled with glass
Stache Terp Tap
146 x 108 x 191mm (5.75 x 4.25 x 7.5in)
Weight
Puffco Peak Pro
376 grams (base)
Stache Terp Tap
~3400g (7.5 lbs), glass cup a further 230g
Power Adjustment
Puffco Peak Pro
Four presets plus single degree control in the app
Stache Terp Tap
6 voltage settings: 2.5V, 2.8V, 3.1V, 3.4V, 3.7V, 4.0V
Concentrate Support
Puffco Peak Pro
Yes (concentrates only)
Stache Terp Tap
Yes, through 510 thread cartridges
Brand
Puffco Peak Pro
Puffco
Stache Terp Tap
Stache
Display Type
Puffco Peak Pro
LED ring and under-glass lighting
Stache Terp Tap
Digital screen with colour coded voltage, battery and ohm readout
Typical price
$450
Sold by The Stash Shack
Typical price
$180
Sold by Headshop.com
Prices are read automatically from retailer pages; confirm the price at checkout. Some links are affiliate links, which support Thermal Extractions at no extra cost to you.
Direct comparison of every spec from each device profile.
| Specification | Puffco Peak Pro | Stache Terp Tap |
|---|---|---|
| Price (USD) | $450 | $180 |
| Device Type | Desktop | Desktop |
| Heating Type | Conduction (3DXL Chamber, heated ceramic side walls) | Conduction (510 thread cartridge or screw-in coil) |
| Heat Up Time | ~20 seconds | — |
| Temperature Range | 254-302°C (490-575°F) presets, 232-316°C (450-600°F) in the Connect app | — |
| Chamber Capacity | 3DXL bowl is 23mm deep, 78% more capacity than the standard 3D Chamber | — |
| Battery Type | Internal, sealed | Internal rechargeable |
| Battery Capacity | — | 3000mAh (listed by retailers, not published by Stache) |
| Battery Life | ~40 dabs per charge | — |
| Charging | USB-C and Qi wireless | USB-C |
| Charge Time | ~2 hours | — |
| Pass-Through Charging | — | No |
| Dimensions | 63 x 63 x 155mm base, ~240mm assembled with glass | 146 x 108 x 191mm (5.75 x 4.25 x 7.5in) |
| Weight | 376 grams (base) | ~3400g (7.5 lbs), glass cup a further 230g |
| Power Adjustment | Four presets plus single degree control in the app | 6 voltage settings: 2.5V, 2.8V, 3.1V, 3.4V, 3.7V, 4.0V |
| Chamber Material | Ceramic | — |
| Concentrate Support | Yes (concentrates only) | Yes, through 510 thread cartridges |
| Brand | Puffco | Stache |
| Adjustable Airflow | XL Joystick Cap steers airflow, no airflow dial | — |
| App Control | Yes, Puffco Connect over Bluetooth (up to 25 saved heat profiles) | — |
| Cartridge Ports | — | Two 510 thread ports (two cartridges, or one cartridge plus one dry herb coil) |
| Country of Manufacture | China | — |
| Display Type | LED ring and under-glass lighting | Digital screen with colour coded voltage, battery and ohm readout |
| Dry Herb Support | — | Optional coil accessory, 3.1V or higher |
| Haptic Feedback | Yes | — |
| Heat Cycle Duration | 40 seconds default, up to 2 minutes in the app, Boost adds 15 seconds and about 10°C | — |
| Manufacturer | Puffco | Stache Products |
| Release Date | 2020 (current 3DXL kit from 2024) | 2025 |
| Session Style | Session | On-Demand |
| Warranty | 2 years on the base, 1 year on the battery, 6 months on the chamber | 1 month |
| Water Filtration | Yes, Peak Pro Glass 2.0 with five laser cut perc slots | — |
The biggest practical difference is price tier: the Stache Terp Tap sits at $180 while the Puffco Peak Pro is $450, a gap of about $270 that puts them in different buying brackets.
Stache Terp Tap is the cheaper option at $180 compared with $450 for the Puffco Peak Pro, about $270 less. Live retailer pricing can shift, so confirm before buying.
Puffco Peak Pro uses conduction (3dxl chamber, heated ceramic side walls) heating, while the Stache Terp Tap uses conduction (510 thread cartridge or screw-in coil). Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
Puffco Peak Pro is the lighter unit at 376 grams (base), around 3024g less than the Stache Terp Tap at ~3400g (7.5 lbs), glass cup a further 230g. The lighter device is easier to carry and pocket day-to-day.
Puffco Peak Pro controls heat with four presets plus single degree control in the app, while the Stache Terp Tap uses 6 voltage settings: 2.5v, 2.8v, 3.1v, 3.4v, 3.7v, 4.0v. Puffco Peak Pro gives you finer per-degree control.
Both devices support concentrate use, typically via an included or aftermarket pad or insert. Check the manual for the recommended approach for each.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.