Price (USD)
Puffco Peak Smart Rig edgePAX FLOW
$350
Puffco Peak Smart Rig
$250
Puffco Peak Smart Rig is typically around $100 lower.
Vaporizer Comparison
PAX FLOW
Puffco Peak Smart Rig
Side-by-side specs, pricing context, and clear decision guidance.
PAX FLOW and Puffco Peak Smart Rig are both electronic vaporizers, but they target different priorities. Puffco Peak Smart Rig is usually the lower-cost pick at $250, around $100 below PAX FLOW. Puffco Peak Smart Rig has the quicker listed heat-up profile, which can matter for shorter sessions.
Specs Compared
17
Different Specs
17
Shared Specs
0
Overall Overlap
0%
Shared Traits
A quick snapshot of the specs people usually care about first.
PAX FLOW
$350
Puffco Peak Smart Rig
$250
Puffco Peak Smart Rig is typically around $100 lower.
PAX FLOW
30-45 seconds
Puffco Peak Smart Rig
~20 seconds
Puffco Peak Smart Rig has the quicker listed heat-up profile.
PAX FLOW
135 grams
Puffco Peak Smart Rig
—
Weight is close enough that portability is likely similar.
PAX FLOW
Hybrid (conduction + convection)
Puffco Peak Smart Rig
—
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
PAX FLOW
$350
Puffco Peak Smart Rig
$250
Device Type
PAX FLOW
Portable
Puffco Peak Smart Rig
—
Heating Type
PAX FLOW
Hybrid (conduction + convection)
Puffco Peak Smart Rig
—
Heat Up Time
PAX FLOW
30-45 seconds
Puffco Peak Smart Rig
~20 seconds
Temperature Range
PAX FLOW
180°C - 225°C (356°F - 437°F)
Puffco Peak Smart Rig
—
Chamber Capacity
PAX FLOW
0.25g - 0.35g
Puffco Peak Smart Rig
—
Battery Capacity
PAX FLOW
2000mAh (internal)
Puffco Peak Smart Rig
—
Battery Life
PAX FLOW
—
Puffco Peak Smart Rig
~30 uses
Charging
PAX FLOW
—
Puffco Peak Smart Rig
Micro USB
Charge Time
PAX FLOW
~20 minutes to 50%, ~40 minutes to full (USB-C)
Puffco Peak Smart Rig
2 hours
Direct comparison of every spec from each device profile.
| Specification | PAX FLOW | Puffco Peak Smart Rig |
|---|---|---|
| Price (USD) | $350 | $250 |
| Device Type | Portable | — |
| Heating Type | Hybrid (conduction + convection) | — |
| Heat Up Time | 30-45 seconds | ~20 seconds |
| Temperature Range | 180°C - 225°C (356°F - 437°F) | — |
| Chamber Capacity | 0.25g - 0.35g | — |
| Battery Capacity | 2000mAh (internal) | — |
| Battery Life | — | ~30 uses |
| Charging | — | Micro USB |
| Charge Time | ~20 minutes to 50%, ~40 minutes to full (USB-C) | 2 hours |
| Dimensions | 107mm x 34.5mm x 29mm | — |
| Weight | 135 grams | — |
| Power Adjustment | Five petal modes + Bong Mode | Modular - 4 Stages |
| Brand | PAX Labs | Puffco |
| Haptic Feedback | — | Yes |
| Run Time | About 5-7 sessions per charge | — |
| Session Length | 8-minute timer | — |
The biggest practical difference is price tier: the Puffco Peak Smart Rig sits at $250 while the PAX FLOW is $350, a gap of about $100 that puts them in different buying brackets.
Puffco Peak Smart Rig is the cheaper option at $250 compared with $350 for the PAX FLOW, about $100 less. Live retailer pricing can shift, so confirm before buying.
Puffco Peak Smart Rig reaches session-ready temperature in ~20 seconds, while the PAX FLOW takes 30-45 seconds. That's roughly 18 seconds quicker on the Puffco Peak Smart Rig, which is useful if you want shorter, on-demand sessions.
PAX FLOW controls heat with five petal modes + bong mode, while the Puffco Peak Smart Rig uses modular - 4 stages. Both let you change temperature, just with different levels of precision.
PAX FLOW fully charges in ~20 minutes to 50%, ~40 minutes to full (USB-C), ahead of 2 hours on the Puffco Peak Smart Rig.
PAX FLOW is the better pick if low-profile use matters. It's tagged as stealth or pocket-friendly in our database, while the Puffco Peak Smart Rig is more conspicuous in hand and harder to keep out of sight.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.