Price (USD)
Sticky Brick Runt edgeFurna
$175
Sticky Brick Runt
$146
Sticky Brick Runt is typically around $29 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Furna
Furna $175
Sticky Brick Runt
Sticky Brick Labs $146
Furna and Sticky Brick Runt solve similar use-cases with different tradeoffs. Sticky Brick Runt is usually the lower-cost pick at $146, around $29 below Furna. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
20
Different Specs
20
Shared Specs
0
Overall Overlap
0%
A quick snapshot of the specs people usually care about first.
Furna
$175
Sticky Brick Runt
$146
Sticky Brick Runt is typically around $29 lower.
Furna
Conduction
Sticky Brick Runt
Convection
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Furna
$175
Sticky Brick Runt
$146
Heating Type
Furna
Conduction
Sticky Brick Runt
Convection
Temperature Range
Furna
160°C - 215°C (320°F - 420°F)
Sticky Brick Runt
N/A
Chamber Capacity
Furna
~0.23g
Sticky Brick Runt
0.1g - 0.25g
Battery Type
Furna
Internal 18650
Sticky Brick Runt
None
Battery Capacity
Furna
3500mAh
Sticky Brick Runt
N/A
Battery Life
Furna
15-20 sessions
Sticky Brick Runt
N/A
Charging
Furna
Micro-USB
Sticky Brick Runt
N/A
Charge Time
Furna
<2.5 hours
Sticky Brick Runt
N/A
Power Adjustment
Furna
Digital
Sticky Brick Runt
Manual
Direct comparison of every spec from each device profile.
| Specification | Furna | Sticky Brick Runt |
|---|---|---|
| Price (USD) | $175 | $146 |
| Device Type | Portable | — |
| Heating Type | Conduction | Convection |
| Heat Up Time | 20-30 Seconds | — |
| Temperature Range | 160°C - 215°C (320°F - 420°F) | N/A |
| Chamber Capacity | ~0.23g | 0.1g - 0.25g |
| Battery Type | Internal 18650 | None |
| Battery Capacity | 3500mAh | N/A |
| Battery Life | 15-20 sessions | N/A |
| Charging | Micro-USB | N/A |
| Charge Time | <2.5 hours | N/A |
| Power Adjustment | Digital | Manual |
| Chamber Material | Stainless Steel | — |
| Concentrate Support | Yes | — |
| Brand | Furna | Sticky Brick Labs |
| Adjustable Airflow | No | Yes |
| Country of Manufacture | — | United States (USA) |
| Release Date | 2020 | — |
| Session Style | — | On-Demand |
| Warranty | 2 years | Lifetime |
The biggest practical difference is heating approach: Furna runs conduction while Sticky Brick Runt runs convection. That changes flavor delivery, vapor density, and how the device responds to slow versus fast draws.
Sticky Brick Runt is the cheaper option at $146 compared with $175 for the Furna, about $29 less. Live retailer pricing can shift, so confirm before buying.
Furna uses conduction heating, while the Sticky Brick Runt uses convection. Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
Furna has the larger chamber at ~0.23g, versus 0.1g - 0.25g on the Sticky Brick Runt. A bigger bowl means fewer reloads on long sessions; a smaller one suits microdosing and quicker bowls.
Furna controls heat with digital, while the Sticky Brick Runt uses manual. Furna gives you finer per-degree control.
Furna's spec sheet lists 15-20 sessions; the Sticky Brick Runt lists N/A. The two manufacturers measure battery life differently here, so direct comparison isn't straightforward.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.