Price (USD)
XMAX Tunke edgeFENiX Pro
$135
XMAX Tunke
$50
XMAX Tunke is typically around $85 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
FENiX Pro
FENiX $135
XMAX Tunke
XMAX $50
FENiX Pro and XMAX Tunke are both portable / electronic vaporizers, but they target different priorities. XMAX Tunke is usually the lower-cost pick at $50, around $85 below FENiX Pro. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
22
Different Specs
19
Shared Specs
3
Overall Overlap
14%
Shared Traits
A quick snapshot of the specs people usually care about first.
FENiX Pro
$135
XMAX Tunke
$50
XMAX Tunke is typically around $85 lower.
FENiX Pro
Convection
XMAX Tunke
Conduction
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
FENiX Pro
$135
XMAX Tunke
$50
Heating Type
FENiX Pro
Convection
XMAX Tunke
Conduction
Temperature Range
FENiX Pro
160°C - 221°C (320°F - 430°F)
XMAX Tunke
260°C - 380°C (500°F - 716°F)
Battery Capacity
FENiX Pro
2300 mAh
XMAX Tunke
650mAh
Charging
FENiX Pro
Micro-USB
XMAX Tunke
USB-C
Power Adjustment
FENiX Pro
Digital (precise)
XMAX Tunke
Modular - 5 Stages
Chamber Material
FENiX Pro
Stainless Steel
XMAX Tunke
Quartz
Brand
FENiX Pro
FENiX
XMAX Tunke
XMAX
Manufacturer
FENiX Pro
South Reed Technology Co
XMAX Tunke
TopGreen Technology Co
Session Style
FENiX Pro
Session
XMAX Tunke
Both
Direct comparison of every spec from each device profile.
| Specification | FENiX Pro | XMAX Tunke |
|---|---|---|
| Price (USD) | $135 | $50 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Conduction |
| Heat Up Time | ~25 seconds | — |
| Temperature Range | 160°C - 221°C (320°F - 430°F) | 260°C - 380°C (500°F - 716°F) |
| Chamber Capacity | 0.2 - 0.3 grams | — |
| Battery Type | Internal | Internal |
| Battery Capacity | 2300 mAh | 650mAh |
| Charging | Micro-USB | USB-C |
| Charge Time | 2 hours | — |
| Dimensions | 5.2x2.5x8.4cm | — |
| Power Adjustment | Digital (precise) | Modular - 5 Stages |
| Chamber Material | Stainless Steel | Quartz |
| Concentrate Support | — | Yes |
| Brand | FENiX | XMAX |
| Country of Manufacture | China | China |
| Display Type | OLED | — |
| Manufacturer | South Reed Technology Co | TopGreen Technology Co |
| Release Date | — | 2023 |
| Session Style | Session | Both |
| Session Time | — | 15 seconds |
| Warranty | 1 year | 6 months |
The biggest practical difference is heating approach: FENiX Pro runs convection while XMAX Tunke runs conduction. That changes flavor delivery, vapor density, and how the device responds to slow versus fast draws.
XMAX Tunke is the cheaper option at $50 compared with $135 for the FENiX Pro, about $85 less. Live retailer pricing can shift, so confirm before buying.
FENiX Pro uses convection heating, while the XMAX Tunke uses conduction. Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
FENiX Pro controls heat with digital (precise), while the XMAX Tunke uses modular - 5 stages. FENiX Pro gives you finer per-degree control.
XMAX Tunke covers 260°C - 380°C (500°F - 716°F), a wider band than the FENiX Pro at 160°C - 221°C (320°F - 430°F). A wider range gives you more room to dial in flavor at the low end and big clouds at the top.
XMAX Tunke charges over USB-C; the FENiX Pro uses a Micro-USB port. USB-C means one fewer cable to keep around if your phone and laptop already use it.
Across the 22 specs we line up, they share 3 and differ on 19, an overlap of about 14%. The differences are concentrated in the areas the spec table highlights with a marker.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.