Price (USD)
FENiX Pro edgeFENiX Pro
$135
PAX FLOW
$350
FENiX Pro is typically around $215 lower.
Vaporizer Comparison
FENiX Pro
PAX FLOW
Side-by-side specs, pricing context, and clear decision guidance.
FENiX Pro and PAX FLOW are both portable / electronic vaporizers, but they target different priorities. FENiX Pro is usually the lower-cost pick at $135, around $215 below PAX FLOW. FENiX Pro has the quicker listed heat-up profile, which can matter for shorter sessions.
Specs Compared
17
Different Specs
16
Shared Specs
1
Overall Overlap
6%
Shared Traits
A quick snapshot of the specs people usually care about first.
FENiX Pro
$135
PAX FLOW
$350
FENiX Pro is typically around $215 lower.
FENiX Pro
~25 seconds
PAX FLOW
30-45 seconds
FENiX Pro has the quicker listed heat-up profile.
FENiX Pro
—
PAX FLOW
135 grams
Weight is close enough that portability is likely similar.
FENiX Pro
Convection
PAX FLOW
Hybrid (conduction + convection)
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
FENiX Pro
$135
PAX FLOW
$350
Heating Type
FENiX Pro
Convection
PAX FLOW
Hybrid (conduction + convection)
Heat Up Time
FENiX Pro
~25 seconds
PAX FLOW
30-45 seconds
Temperature Range
FENiX Pro
160°C - 221°C (320°F - 430°F)
PAX FLOW
180°C - 225°C (356°F - 437°F)
Chamber Capacity
FENiX Pro
0.2 - 0.3 grams
PAX FLOW
0.25g - 0.35g
Battery Capacity
FENiX Pro
2300 mAh
PAX FLOW
2000mAh (internal)
Charging
FENiX Pro
Micro-USB
PAX FLOW
—
Charge Time
FENiX Pro
2 hours
PAX FLOW
~20 minutes to 50%, ~40 minutes to full (USB-C)
Dimensions
FENiX Pro
5.2x2.5x8.4cm
PAX FLOW
107mm x 34.5mm x 29mm
Weight
FENiX Pro
—
PAX FLOW
135 grams
Direct comparison of every spec from each device profile.
| Specification | FENiX Pro | PAX FLOW |
|---|---|---|
| Price (USD) | $135 | $350 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Hybrid (conduction + convection) |
| Heat Up Time | ~25 seconds | 30-45 seconds |
| Temperature Range | 160°C - 221°C (320°F - 430°F) | 180°C - 225°C (356°F - 437°F) |
| Chamber Capacity | 0.2 - 0.3 grams | 0.25g - 0.35g |
| Battery Capacity | 2300 mAh | 2000mAh (internal) |
| Charging | Micro-USB | — |
| Charge Time | 2 hours | ~20 minutes to 50%, ~40 minutes to full (USB-C) |
| Dimensions | 5.2x2.5x8.4cm | 107mm x 34.5mm x 29mm |
| Weight | — | 135 grams |
| Power Adjustment | — | Five petal modes + Bong Mode |
| Brand | — | PAX Labs |
| Display Type | OLED | — |
| Manufacturer | South Reed Technology Co | — |
| Run Time | — | About 5-7 sessions per charge |
| Session Length | — | 8-minute timer |
The biggest practical difference is price tier: the FENiX Pro sits at $135 while the PAX FLOW is $350, a gap of about $215 that puts them in different buying brackets.
FENiX Pro is the cheaper option at $135 compared with $350 for the PAX FLOW, about $215 less. Live retailer pricing can shift, so confirm before buying.
FENiX Pro reaches session-ready temperature in ~25 seconds, while the PAX FLOW takes 30-45 seconds. That's roughly 13 seconds quicker on the FENiX Pro, which is useful if you want shorter, on-demand sessions.
FENiX Pro uses convection heating, while the PAX FLOW uses hybrid (conduction + convection). Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
PAX FLOW has the larger chamber at 0.25g - 0.35g, versus 0.2 - 0.3 grams on the FENiX Pro. A bigger bowl means fewer reloads on long sessions; a smaller one suits microdosing and quicker bowls.
PAX FLOW fully charges in ~20 minutes to 50%, ~40 minutes to full (USB-C), ahead of 2 hours on the FENiX Pro.
PAX FLOW is the better pick if low-profile use matters. It's tagged as stealth or pocket-friendly in our database, while the FENiX Pro is more conspicuous in hand and harder to keep out of sight.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.