Price (USD)
Close callFENiX 2.0
$129
Sticky Brick Runt
$146
Pricing is very close between both devices.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
FENiX 2.0
FENiX $129
Sticky Brick Runt
Sticky Brick Labs $146
FENiX 2.0 and Sticky Brick Runt are both convection vaporizers, but they target different priorities. Their listed prices are close ($129 vs $146). Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
23
Different Specs
22
Shared Specs
1
Overall Overlap
4%
Shared Traits
A quick snapshot of the specs people usually care about first.
FENiX 2.0
$129
Sticky Brick Runt
$146
Pricing is very close between both devices.
FENiX 2.0
Convection
Sticky Brick Runt
Convection
Both devices use a similar heating approach.
Top specs where these two devices diverge.
Price (USD)
FENiX 2.0
$129
Sticky Brick Runt
$146
Temperature Range
FENiX 2.0
160°C - 221°C (320°F - 430°F)
Sticky Brick Runt
N/A
Battery Type
FENiX 2.0
Internal
Sticky Brick Runt
None
Battery Capacity
FENiX 2.0
4400 mAh
Sticky Brick Runt
N/A
Battery Life
FENiX 2.0
~75 minutes
Sticky Brick Runt
N/A
Charging
FENiX 2.0
Micro USB
Sticky Brick Runt
N/A
Charge Time
FENiX 2.0
2.5 hours
Sticky Brick Runt
N/A
Power Adjustment
FENiX 2.0
Digital (precise)
Sticky Brick Runt
Manual
Brand
FENiX 2.0
FENiX
Sticky Brick Runt
Sticky Brick Labs
Country of Manufacture
FENiX 2.0
China
Sticky Brick Runt
United States (USA)
Direct comparison of every spec from each device profile.
| Specification | FENiX 2.0 | Sticky Brick Runt |
|---|---|---|
| Price (USD) | $129 | $146 |
| Device Type | Portable | — |
| Heating Type | Convection | Convection |
| Heat Up Time | <30 seconds | — |
| Temperature Range | 160°C - 221°C (320°F - 430°F) | N/A |
| Chamber Capacity | — | 0.1g - 0.25g |
| Battery Type | Internal | None |
| Battery Capacity | 4400 mAh | N/A |
| Battery Life | ~75 minutes | N/A |
| Charging | Micro USB | N/A |
| Charge Time | 2.5 hours | N/A |
| Dimensions | 110x60x30mm | — |
| Weight | ~232 grams | — |
| Power Adjustment | Digital (precise) | Manual |
| Chamber Material | Removable titanium | — |
| Brand | FENiX | Sticky Brick Labs |
| Adjustable Airflow | — | Yes |
| Country of Manufacture | China | United States (USA) |
| Display Type | 0.95 inch OLED | — |
| Manufacturer | South Reed Technology Co | — |
| Release Date | 2016 | — |
| Session Style | Session | On-Demand |
| Warranty | 2 years | Lifetime |
There's no single headline gap. The differences are spread across 22 smaller spec rows rather than concentrated in one place. The spec table below marks each row that differs.
Listed prices are close: $129 for the FENiX 2.0 versus $146 for the Sticky Brick Runt. Day-to-day price will likely come down to whichever retailer is running a promotion.
FENiX 2.0 controls heat with digital (precise), while the Sticky Brick Runt uses manual. FENiX 2.0 gives you finer per-degree control.
FENiX 2.0's spec sheet lists ~75 minutes; the Sticky Brick Runt lists N/A. The two manufacturers measure battery life differently here, so direct comparison isn't straightforward.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.