Price (USD)
FENiX 2.0 edgeFENiX 2.0
$129
Sticky Brick Maxx
$190
FENiX 2.0 is typically around $61 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
FENiX 2.0
FENiX $129
Sticky Brick Maxx
Sticky Brick Labs $190
FENiX 2.0 and Sticky Brick Maxx are both convection vaporizers, but they target different priorities. FENiX 2.0 is usually the lower-cost pick at $129, around $61 below Sticky Brick Maxx. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
23
Different Specs
22
Shared Specs
1
Overall Overlap
4%
Shared Traits
A quick snapshot of the specs people usually care about first.
FENiX 2.0
$129
Sticky Brick Maxx
$190
FENiX 2.0 is typically around $61 lower.
FENiX 2.0
Convection
Sticky Brick Maxx
Convection
Both devices use a similar heating approach.
Top specs where these two devices diverge.
Price (USD)
FENiX 2.0
$129
Sticky Brick Maxx
$190
Device Type
FENiX 2.0
Portable
Sticky Brick Maxx
Desktop
Temperature Range
FENiX 2.0
160°C - 221°C (320°F - 430°F)
Sticky Brick Maxx
N/A
Battery Type
FENiX 2.0
Internal
Sticky Brick Maxx
None
Battery Capacity
FENiX 2.0
4400 mAh
Sticky Brick Maxx
N/A
Battery Life
FENiX 2.0
~75 minutes
Sticky Brick Maxx
N/A
Charging
FENiX 2.0
Micro USB
Sticky Brick Maxx
N/A
Charge Time
FENiX 2.0
2.5 hours
Sticky Brick Maxx
N/A
Power Adjustment
FENiX 2.0
Digital (precise)
Sticky Brick Maxx
Manual
Brand
FENiX 2.0
FENiX
Sticky Brick Maxx
Sticky Brick Labs
Direct comparison of every spec from each device profile.
| Specification | FENiX 2.0 | Sticky Brick Maxx |
|---|---|---|
| Price (USD) | $129 | $190 |
| Device Type | Portable | Desktop |
| Heating Type | Convection | Convection |
| Heat Up Time | <30 seconds | — |
| Temperature Range | 160°C - 221°C (320°F - 430°F) | N/A |
| Chamber Capacity | — | ~0.1g - 0.3g |
| Battery Type | Internal | None |
| Battery Capacity | 4400 mAh | N/A |
| Battery Life | ~75 minutes | N/A |
| Charging | Micro USB | N/A |
| Charge Time | 2.5 hours | N/A |
| Dimensions | 110x60x30mm | — |
| Weight | ~232 grams | — |
| Power Adjustment | Digital (precise) | Manual |
| Chamber Material | Removable titanium | — |
| Brand | FENiX | Sticky Brick Labs |
| Adjustable Airflow | — | Yes |
| Country of Manufacture | China | United States (USA) |
| Display Type | 0.95 inch OLED | — |
| Manufacturer | South Reed Technology Co | — |
| Release Date | 2016 | — |
| Session Style | Session | — |
| Warranty | 2 years | Lifetime |
The biggest practical difference is form factor: these aren't the same kind of device. FENiX 2.0 is a portable, Sticky Brick Maxx is a desktop. Pick based on whether you want something portable or something stationary.
FENiX 2.0 is the cheaper option at $129 compared with $190 for the Sticky Brick Maxx, about $61 less. Live retailer pricing can shift, so confirm before buying.
FENiX 2.0 is the take-anywhere choice. It's a portable, battery-powered unit, while the Sticky Brick Maxx is built for home use, where bigger heaters, AC power, and larger chambers make sense.
FENiX 2.0 controls heat with digital (precise), while the Sticky Brick Maxx uses manual. FENiX 2.0 gives you finer per-degree control.
FENiX 2.0's spec sheet lists ~75 minutes; the Sticky Brick Maxx lists N/A. The two manufacturers measure battery life differently here, so direct comparison isn't straightforward.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.