Price (USD)
FENiX 2.0 edgeFENiX 2.0
$129
PAX FLOW
$350
FENiX 2.0 is typically around $221 lower.
Vaporizer Comparison
FENiX 2.0
PAX FLOW
Side-by-side specs, pricing context, and clear decision guidance.
FENiX 2.0 and PAX FLOW are both portable / electronic vaporizers, but they target different priorities. FENiX 2.0 is usually the lower-cost pick at $129, around $221 below PAX FLOW. Heat-up speed is broadly similar between the two.
Specs Compared
17
Different Specs
16
Shared Specs
1
Overall Overlap
6%
Shared Traits
A quick snapshot of the specs people usually care about first.
FENiX 2.0
$129
PAX FLOW
$350
FENiX 2.0 is typically around $221 lower.
FENiX 2.0
<30 seconds
PAX FLOW
30-45 seconds
Both devices are in a similar heat-up range.
FENiX 2.0
~232 grams
PAX FLOW
135 grams
PAX FLOW is the lighter listed unit.
FENiX 2.0
Convection
PAX FLOW
Hybrid (conduction + convection)
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
FENiX 2.0
$129
PAX FLOW
$350
Heating Type
FENiX 2.0
Convection
PAX FLOW
Hybrid (conduction + convection)
Heat Up Time
FENiX 2.0
<30 seconds
PAX FLOW
30-45 seconds
Temperature Range
FENiX 2.0
—
PAX FLOW
180°C - 225°C (356°F - 437°F)
Chamber Capacity
FENiX 2.0
—
PAX FLOW
0.25g - 0.35g
Battery Capacity
FENiX 2.0
4400 mAh
PAX FLOW
2000mAh (internal)
Charge Time
FENiX 2.0
2.5 hours
PAX FLOW
~20 minutes to 50%, ~40 minutes to full (USB-C)
Dimensions
FENiX 2.0
—
PAX FLOW
107mm x 34.5mm x 29mm
Weight
FENiX 2.0
~232 grams
PAX FLOW
135 grams
Power Adjustment
FENiX 2.0
—
PAX FLOW
Five petal modes + Bong Mode
Direct comparison of every spec from each device profile.
| Specification | FENiX 2.0 | PAX FLOW |
|---|---|---|
| Price (USD) | $129 | $350 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Hybrid (conduction + convection) |
| Heat Up Time | <30 seconds | 30-45 seconds |
| Temperature Range | — | 180°C - 225°C (356°F - 437°F) |
| Chamber Capacity | — | 0.25g - 0.35g |
| Battery Capacity | 4400 mAh | 2000mAh (internal) |
| Charge Time | 2.5 hours | ~20 minutes to 50%, ~40 minutes to full (USB-C) |
| Dimensions | — | 107mm x 34.5mm x 29mm |
| Weight | ~232 grams | 135 grams |
| Power Adjustment | — | Five petal modes + Bong Mode |
| Brand | — | PAX Labs |
| Chamber Material | Removable titanium | — |
| Display Type | 0.95 inch OLED | — |
| Manufacturer | South Reed Technology Co | — |
| Run Time | — | About 5-7 sessions per charge |
| Session Length | — | 8-minute timer |
The biggest practical difference is price tier: the FENiX 2.0 sits at $129 while the PAX FLOW is $350, a gap of about $221 that puts them in different buying brackets.
FENiX 2.0 is the cheaper option at $129 compared with $350 for the PAX FLOW, about $221 less. Live retailer pricing can shift, so confirm before buying.
FENiX 2.0 reaches session-ready temperature in <30 seconds, while the PAX FLOW takes 30-45 seconds. That's roughly 8 seconds quicker on the FENiX 2.0, which is useful if you want shorter, on-demand sessions.
FENiX 2.0 uses convection heating, while the PAX FLOW uses hybrid (conduction + convection). Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
PAX FLOW is the lighter unit at 135 grams, around 97g less than the FENiX 2.0 at ~232 grams. The lighter device is easier to carry and pocket day-to-day.
PAX FLOW fully charges in ~20 minutes to 50%, ~40 minutes to full (USB-C), ahead of 2.5 hours on the FENiX 2.0.
PAX FLOW is the better pick if low-profile use matters. It's tagged as stealth or pocket-friendly in our database, while the FENiX 2.0 is more conspicuous in hand and harder to keep out of sight.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.