Price (USD)
Dynavap M+ edgeDynavap M+
$89
Sticky Brick Runt
$146
Dynavap M+ is typically around $57 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Dynavap M+
DynaVap $89
Sticky Brick Runt
Sticky Brick Labs $146
Dynavap M+ and Sticky Brick Runt are both analog / reviewed vaporizers, but they target different priorities. Dynavap M+ is usually the lower-cost pick at $89, around $57 below Sticky Brick Runt. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
21
Different Specs
12
Shared Specs
9
Overall Overlap
43%
Shared Traits
A quick snapshot of the specs people usually care about first.
Dynavap M+
$89
Sticky Brick Runt
$146
Dynavap M+ is typically around $57 lower.
Dynavap M+
Hybrid
Sticky Brick Runt
Convection
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Dynavap M+
$89
Sticky Brick Runt
$146
Heating Type
Dynavap M+
Hybrid
Sticky Brick Runt
Convection
Temperature Range
Dynavap M+
230°C - 250°C
Sticky Brick Runt
N/A
Chamber Capacity
Dynavap M+
~0.1g
Sticky Brick Runt
0.1g - 0.25g
Brand
Dynavap M+
DynaVap
Sticky Brick Runt
Sticky Brick Labs
Direct comparison of every spec from each device profile.
| Specification | Dynavap M+ | Sticky Brick Runt |
|---|---|---|
| Price (USD) | $89 | $146 |
| Device Type | Portable | — |
| Heating Type | Hybrid | Convection |
| Heat Up Time | Depending on the heat source, ~20 seconds | — |
| Temperature Range | 230°C - 250°C | N/A |
| Chamber Capacity | ~0.1g | 0.1g - 0.25g |
| Battery Type | None | None |
| Battery Capacity | N/A | N/A |
| Battery Life | N/A | N/A |
| Charging | N/A | N/A |
| Charge Time | N/A | N/A |
| Power Adjustment | Manual | Manual |
| Chamber Material | Stainless Steel | — |
| Brand | DynaVap | Sticky Brick Labs |
| Adjustable Airflow | Yes | Yes |
| Body Material | Mostly stainless steel & high heat silicone seals | — |
| Country of Manufacture | United States (USA) | United States (USA) |
| Length | 92mm | — |
| Release Date | 2023 | — |
| Session Style | — | On-Demand |
| Warranty | Lifetime | Lifetime |
The biggest practical difference is heating approach: Dynavap M+ runs hybrid while Sticky Brick Runt runs convection. That changes flavor delivery, vapor density, and how the device responds to slow versus fast draws.
Dynavap M+ is the cheaper option at $89 compared with $146 for the Sticky Brick Runt, about $57 less. Live retailer pricing can shift, so confirm before buying.
Dynavap M+ uses hybrid heating, while the Sticky Brick Runt uses convection. Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
Sticky Brick Runt has the larger chamber at 0.1g - 0.25g, versus ~0.1g on the Dynavap M+. A bigger bowl means fewer reloads on long sessions; a smaller one suits microdosing and quicker bowls.
Dynavap M+ is the better fit for microdosing in our database, typically thanks to a smaller chamber, finer temperature control, or both.
Across the 21 specs we line up, they share 9 and differ on 12, an overlap of about 43%. The differences are concentrated in the areas the spec table highlights with a marker.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.