Price (USD)
Dynavap M+ edgeDynavap M+
$89
Sticky Brick OG Brick
$180
Dynavap M+ is typically around $91 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Dynavap M+
DynaVap $89
Sticky Brick OG Brick
Sticky Brick Labs $180
Dynavap M+ and Sticky Brick OG Brick are both portable / analog vaporizers, but they target different priorities. Dynavap M+ is usually the lower-cost pick at $89, around $91 below Sticky Brick OG Brick. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
24
Different Specs
14
Shared Specs
10
Overall Overlap
42%
Shared Traits
A quick snapshot of the specs people usually care about first.
Dynavap M+
$89
Sticky Brick OG Brick
$180
Dynavap M+ is typically around $91 lower.
Dynavap M+
Hybrid
Sticky Brick OG Brick
Convection
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Dynavap M+
$89
Sticky Brick OG Brick
$180
Heating Type
Dynavap M+
Hybrid
Sticky Brick OG Brick
Convection
Temperature Range
Dynavap M+
230°C - 250°C
Sticky Brick OG Brick
N/A
Chamber Capacity
Dynavap M+
~0.1g
Sticky Brick OG Brick
~0.4g
Brand
Dynavap M+
DynaVap
Sticky Brick OG Brick
Sticky Brick Labs
Direct comparison of every spec from each device profile.
| Specification | Dynavap M+ | Sticky Brick OG Brick |
|---|---|---|
| Price (USD) | $89 | $180 |
| Device Type | Portable | Portable |
| Heating Type | Hybrid | Convection |
| Heat Up Time | Depending on the heat source, ~20 seconds | — |
| Temperature Range | 230°C - 250°C | N/A |
| Chamber Capacity | ~0.1g | ~0.4g |
| Battery Type | None | None |
| Battery Capacity | N/A | N/A |
| Battery Life | N/A | N/A |
| Charging | N/A | N/A |
| Charge Time | N/A | N/A |
| Dimensions | — | 95x95x46mm |
| Weight | — | ~369g |
| Power Adjustment | Manual | Manual |
| Chamber Material | Stainless Steel | — |
| Concentrate Support | — | Yes |
| Brand | DynaVap | Sticky Brick Labs |
| Adjustable Airflow | Yes | Yes |
| Body Material | Mostly stainless steel & high heat silicone seals | — |
| Country of Manufacture | United States (USA) | United States (USA) |
| Length | 92mm | — |
| Release Date | 2023 | — |
| Session Style | — | On-Demand |
| Warranty | Lifetime | Lifetime |
The biggest practical difference is heating approach: Dynavap M+ runs hybrid while Sticky Brick OG Brick runs convection. That changes flavor delivery, vapor density, and how the device responds to slow versus fast draws.
Dynavap M+ is the cheaper option at $89 compared with $180 for the Sticky Brick OG Brick, about $91 less. Live retailer pricing can shift, so confirm before buying.
Dynavap M+ uses hybrid heating, while the Sticky Brick OG Brick uses convection. Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
Sticky Brick OG Brick has the larger chamber at ~0.4g, versus ~0.1g on the Dynavap M+. A bigger bowl means fewer reloads on long sessions; a smaller one suits microdosing and quicker bowls.
Across the 24 specs we line up, they share 10 and differ on 14, an overlap of about 42%. The differences are concentrated in the areas the spec table highlights with a marker.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.