Price (USD)
Dryonic II edgeDryonic II
$95
PAX FLOW
$350
Dryonic II is typically around $255 lower.
Vaporizer Comparison
Dryonic II
PAX FLOW
Side-by-side specs, pricing context, and clear decision guidance.
Dryonic II and PAX FLOW are both portable / electronic vaporizers, but they target different priorities. Dryonic II is usually the lower-cost pick at $95, around $255 below PAX FLOW. PAX FLOW has the quicker listed heat-up profile, which can matter for shorter sessions.
Specs Compared
17
Different Specs
16
Shared Specs
1
Overall Overlap
6%
Shared Traits
A quick snapshot of the specs people usually care about first.
Dryonic II
$95
PAX FLOW
$350
Dryonic II is typically around $255 lower.
Dryonic II
<50 Seconds
PAX FLOW
30-45 seconds
PAX FLOW has the quicker listed heat-up profile.
Dryonic II
—
PAX FLOW
135 grams
Weight is close enough that portability is likely similar.
Dryonic II
Convection
PAX FLOW
Hybrid (conduction + convection)
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Dryonic II
$95
PAX FLOW
$350
Heating Type
Dryonic II
Convection
PAX FLOW
Hybrid (conduction + convection)
Heat Up Time
Dryonic II
<50 Seconds
PAX FLOW
30-45 seconds
Temperature Range
Dryonic II
200-430°F
PAX FLOW
180°C - 225°C (356°F - 437°F)
Chamber Capacity
Dryonic II
<0.5g
PAX FLOW
0.25g - 0.35g
Battery Capacity
Dryonic II
1200mAh
PAX FLOW
2000mAh (internal)
Charging
Dryonic II
Micro-USB
PAX FLOW
—
Charge Time
Dryonic II
—
PAX FLOW
~20 minutes to 50%, ~40 minutes to full (USB-C)
Dimensions
Dryonic II
—
PAX FLOW
107mm x 34.5mm x 29mm
Weight
Dryonic II
—
PAX FLOW
135 grams
Direct comparison of every spec from each device profile.
| Specification | Dryonic II | PAX FLOW |
|---|---|---|
| Price (USD) | $95 | $350 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Hybrid (conduction + convection) |
| Heat Up Time | <50 Seconds | 30-45 seconds |
| Temperature Range | 200-430°F | 180°C - 225°C (356°F - 437°F) |
| Chamber Capacity | <0.5g | 0.25g - 0.35g |
| Battery Capacity | 1200mAh | 2000mAh (internal) |
| Charging | Micro-USB | — |
| Charge Time | — | ~20 minutes to 50%, ~40 minutes to full (USB-C) |
| Dimensions | — | 107mm x 34.5mm x 29mm |
| Weight | — | 135 grams |
| Power Adjustment | Digital - 5 degree incriments | Five petal modes + Bong Mode |
| Brand | — | PAX Labs |
| Display Type | OLED | — |
| Manufacturer | O2VAPE | — |
| Run Time | — | About 5-7 sessions per charge |
| Session Length | — | 8-minute timer |
The biggest practical difference is price tier: the Dryonic II sits at $95 while the PAX FLOW is $350, a gap of about $255 that puts them in different buying brackets.
Dryonic II is the cheaper option at $95 compared with $350 for the PAX FLOW, about $255 less. Live retailer pricing can shift, so confirm before buying.
PAX FLOW reaches session-ready temperature in 30-45 seconds, while the Dryonic II takes <50 Seconds. That's roughly 13 seconds quicker on the PAX FLOW, which is useful if you want shorter, on-demand sessions.
Dryonic II uses convection heating, while the PAX FLOW uses hybrid (conduction + convection). Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
Dryonic II has the larger chamber at <0.5g, versus 0.25g - 0.35g on the PAX FLOW. A bigger bowl means fewer reloads on long sessions; a smaller one suits microdosing and quicker bowls.
Dryonic II controls heat with digital - 5 degree incriments, while the PAX FLOW uses five petal modes + bong mode. Dryonic II gives you finer per-degree control.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.