Price (USD)
FENiX Pro edgeCrafty+
$279
FENiX Pro
$135
FENiX Pro is typically around $144 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Crafty+
Storz & Bickel $279
FENiX Pro
FENiX $135
Crafty+ and FENiX Pro are both convection / portable vaporizers, but they target different priorities. FENiX Pro is usually the lower-cost pick at $135, around $144 below Crafty+. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
23
Different Specs
19
Shared Specs
4
Overall Overlap
17%
Shared Traits
A quick snapshot of the specs people usually care about first.
Crafty+
$279
FENiX Pro
$135
FENiX Pro is typically around $144 lower.
Crafty+
Convection
FENiX Pro
Convection
Both devices use a similar heating approach.
Top specs where these two devices diverge.
Price (USD)
Crafty+
$279
FENiX Pro
$135
Temperature Range
Crafty+
40°C - 210°C (104°F - 410°F)
FENiX Pro
160°C - 221°C (320°F - 430°F)
Chamber Capacity
Crafty+
~0.25g
FENiX Pro
0.2 - 0.3 grams
Battery Capacity
Crafty+
2800mAh
FENiX Pro
2300 mAh
Charging
Crafty+
USB-C
FENiX Pro
Micro-USB
Charge Time
Crafty+
25 minutes
FENiX Pro
2 hours
Dimensions
Crafty+
110x57x33mm
FENiX Pro
5.2x2.5x8.4cm
Power Adjustment
Crafty+
3 Preset Modes
FENiX Pro
Digital (precise)
Chamber Material
Crafty+
Ceramic Coated
FENiX Pro
Stainless Steel
Brand
Crafty+
Storz & Bickel
FENiX Pro
FENiX
Direct comparison of every spec from each device profile.
| Specification | Crafty+ | FENiX Pro |
|---|---|---|
| Price (USD) | $279 | $135 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Convection |
| Heat Up Time | — | ~25 seconds |
| Temperature Range | 40°C - 210°C (104°F - 410°F) | 160°C - 221°C (320°F - 430°F) |
| Chamber Capacity | ~0.25g | 0.2 - 0.3 grams |
| Battery Type | Internal | Internal |
| Battery Capacity | 2800mAh | 2300 mAh |
| Battery Life | ~60 minutes | — |
| Charging | USB-C | Micro-USB |
| Charge Time | 25 minutes | 2 hours |
| Dimensions | 110x57x33mm | 5.2x2.5x8.4cm |
| Weight | 135g | — |
| Power Adjustment | 3 Preset Modes | Digital (precise) |
| Chamber Material | Ceramic Coated | Stainless Steel |
| Brand | Storz & Bickel | FENiX |
| Country of Manufacture | Germany | China |
| Display Type | — | OLED |
| Fast Charge | Yes | — |
| Manufacturer | — | South Reed Technology Co |
| Release Date | 2019 | — |
| Session Style | Session | Session |
| Warranty | 2 years | 1 year |
The biggest practical difference is price tier: the FENiX Pro sits at $135 while the Crafty+ is $279, a gap of about $144 that puts them in different buying brackets.
FENiX Pro is the cheaper option at $135 compared with $279 for the Crafty+, about $144 less. Live retailer pricing can shift, so confirm before buying.
Crafty+ controls heat with 3 preset modes, while the FENiX Pro uses digital (precise). FENiX Pro gives you finer per-degree control.
Crafty+ lists a chamber capacity of ~0.25g; the FENiX Pro lists 0.2 - 0.3 grams.
Crafty+ fully charges in 25 minutes, ahead of 2 hours on the FENiX Pro.
Crafty+ covers 40°C - 210°C (104°F - 410°F), a wider band than the FENiX Pro at 160°C - 221°C (320°F - 430°F). A wider range gives you more room to dial in flavor at the low end and big clouds at the top.
Crafty+ charges over USB-C; the FENiX Pro uses a Micro-USB port. USB-C means one fewer cable to keep around if your phone and laptop already use it.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.