Price (USD)
Atmos Jump edgeAtmos Jump
$65
PAX FLOW
$350
Atmos Jump is typically around $285 lower.
Vaporizer Comparison
Atmos Jump
PAX FLOW
Side-by-side specs, pricing context, and clear decision guidance.
Atmos Jump and PAX FLOW are both discrete / portable vaporizers, but they target different priorities. Atmos Jump is usually the lower-cost pick at $65, around $285 below PAX FLOW. PAX FLOW has the quicker listed heat-up profile, which can matter for shorter sessions.
Specs Compared
18
Different Specs
17
Shared Specs
1
Overall Overlap
6%
Shared Traits
A quick snapshot of the specs people usually care about first.
Atmos Jump
$65
PAX FLOW
$350
Atmos Jump is typically around $285 lower.
Atmos Jump
~60 seconds
PAX FLOW
30-45 seconds
PAX FLOW has the quicker listed heat-up profile.
Atmos Jump
—
PAX FLOW
135 grams
Weight is close enough that portability is likely similar.
Atmos Jump
Convection
PAX FLOW
Hybrid (conduction + convection)
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Atmos Jump
$65
PAX FLOW
$350
Heating Type
Atmos Jump
Convection
PAX FLOW
Hybrid (conduction + convection)
Heat Up Time
Atmos Jump
~60 seconds
PAX FLOW
30-45 seconds
Temperature Range
Atmos Jump
—
PAX FLOW
180°C - 225°C (356°F - 437°F)
Chamber Capacity
Atmos Jump
—
PAX FLOW
0.25g - 0.35g
Battery Capacity
Atmos Jump
1200mAh
PAX FLOW
2000mAh (internal)
Charging
Atmos Jump
Micro USB
PAX FLOW
—
Charge Time
Atmos Jump
~4 hours
PAX FLOW
~20 minutes to 50%, ~40 minutes to full (USB-C)
Dimensions
Atmos Jump
145x17mm
PAX FLOW
107mm x 34.5mm x 29mm
Weight
Atmos Jump
—
PAX FLOW
135 grams
Direct comparison of every spec from each device profile.
| Specification | Atmos Jump | PAX FLOW |
|---|---|---|
| Price (USD) | $65 | $350 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Hybrid (conduction + convection) |
| Heat Up Time | ~60 seconds | 30-45 seconds |
| Temperature Range | — | 180°C - 225°C (356°F - 437°F) |
| Chamber Capacity | — | 0.25g - 0.35g |
| Battery Capacity | 1200mAh | 2000mAh (internal) |
| Charging | Micro USB | — |
| Charge Time | ~4 hours | ~20 minutes to 50%, ~40 minutes to full (USB-C) |
| Dimensions | 145x17mm | 107mm x 34.5mm x 29mm |
| Weight | — | 135 grams |
| Power Adjustment | Modular | Five petal modes + Bong Mode |
| Oven Type | Stainless Steel | — |
| Brand | AtmosRx | PAX Labs |
| Battery Tech | Lithium-ion | — |
| Capacity | ~0.2g | — |
| Run Time | — | About 5-7 sessions per charge |
| Session Length | — | 8-minute timer |
The biggest practical difference is price tier: the Atmos Jump sits at $65 while the PAX FLOW is $350, a gap of about $285 that puts them in different buying brackets.
Atmos Jump is the cheaper option at $65 compared with $350 for the PAX FLOW, about $285 less. Live retailer pricing can shift, so confirm before buying.
PAX FLOW reaches session-ready temperature in 30-45 seconds, while the Atmos Jump takes ~60 seconds. That's roughly 23 seconds quicker on the PAX FLOW, which is useful if you want shorter, on-demand sessions.
Atmos Jump uses convection heating, while the PAX FLOW uses hybrid (conduction + convection). Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
PAX FLOW fully charges in ~20 minutes to 50%, ~40 minutes to full (USB-C), ahead of ~4 hours on the Atmos Jump.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.