Price (USD)
XMAX V3 Pro edgeSticky Brick OG Brick
$180
XMAX V3 Pro
$110
XMAX V3 Pro is typically around $70 lower.
VS
Sticky Brick OG Brick vs XMAX V3 Pro
Side-by-side vaporizer comparison including specs, pricing context, and decision guidance.
Editorial Summary
Sticky Brick OG Brick and XMAX V3 Pro are both convection / portable vaporizers, but they target different priorities. XMAX V3 Pro is usually the lower-cost pick at $110, around $70 below Sticky Brick OG Brick. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
16
Different Specs
16
Shared Specs
0
Overall Overlap
0%
Shared Traits
ConvectionPortable
Head-to-Head Highlights
Quick snapshot of the specs people usually care about first.
Weight
Close / ContextualSticky Brick OG Brick
—
XMAX V3 Pro
105 grams
Weight is close enough that portability is likely similar.
Key Differences at a Glance
Top specs where these two devices diverge.
Price (USD)
Sticky Brick OG Brick
$180
XMAX V3 Pro
$110
Temperature Range
Sticky Brick OG Brick
—
XMAX V3 Pro
100 - 220C (212 - 428F)
Battery Type
Sticky Brick OG Brick
—
XMAX V3 Pro
18650 (user replaceable)
Width
Sticky Brick OG Brick
—
XMAX V3 Pro
2.5cm
Height
Sticky Brick OG Brick
—
XMAX V3 Pro
15cm
Weight
Sticky Brick OG Brick
—
XMAX V3 Pro
105 grams
Capacity
Sticky Brick OG Brick
—
XMAX V3 Pro
0.1g - 0.15g
Chamber Material
Sticky Brick OG Brick
—
XMAX V3 Pro
Stainless steel
Charging
Sticky Brick OG Brick
—
XMAX V3 Pro
USB-C
Heating Element
Sticky Brick OG Brick
—
XMAX V3 Pro
Ceramic
Choose Sticky Brick OG Brick if...
- Your usage leans toward wood and analog sessions.
- You prefer Sticky Brick OG Brick's overall feature mix and form factor.
- You prefer Sticky Brick OG Brick's overall feature mix and form factor.
Choose XMAX V3 Pro if...
- You want the lower listed entry price ($110 vs $180).
- Your usage leans toward budget and electronic sessions.
- You prefer XMAX V3 Pro's overall feature mix and form factor.
Spec Comparison Table
Direct comparison of shared and unique specifications from each device profile. (16 differences, 0 overlaps)
| Specification | Sticky Brick OG Brick | XMAX V3 Pro |
|---|---|---|
| Price (USD) diff | $180 | $110 |
| Temperature Range diff | — | 100 - 220C (212 - 428F) |
| Battery Type diff | — | 18650 (user replaceable) |
| Width diff | — | 2.5cm |
| Height diff | — | 15cm |
| Weight diff | — | 105 grams |
| Capacity diff | — | 0.1g - 0.15g |
| Chamber Material diff | — | Stainless steel |
| Charging diff | — | USB-C |
| Heating Element diff | — | Ceramic |
| Heating Time diff | — | 15-30 seconds |
| Manufacturer diff | — | TopGreen Technology Co |
| Name diff | — | V3 Pro Vaporizer |
| Run Time diff | — | 30-45 minutes or 5-6 sessions |
| Thickness diff | — | 2.3cm |
| Type diff | — | Hybrid (primarily convection) |
Comparison FAQs
Is Sticky Brick OG Brick better than XMAX V3 Pro?
Neither is universally better. Sticky Brick OG Brick fits some priorities, while XMAX V3 Pro fits others. This side-by-side comparison highlights the tradeoffs so you can choose based on your own use-case.
Which is cheaper: Sticky Brick OG Brick or XMAX V3 Pro?
XMAX V3 Pro is listed lower ($110) compared with Sticky Brick OG Brick ($180), but live retailer pricing can change.
Which heats up faster between Sticky Brick OG Brick and XMAX V3 Pro?
Published heat-up data differs by source, so practical session feel may matter more than one raw number.
Need a Different Matchup?
Jump into the full comparison hub to pick any two devices and open a canonical side-by-side page.