Price (USD)
Sticky Brick Junior edgeSticky Brick Junior
$150
Tinymight 2
$349
Sticky Brick Junior is typically around $199 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Sticky Brick Junior
Sticky Brick Labs $150
Tinymight 2
Tinymight $349
Sticky Brick Junior and Tinymight 2 are both portable / convection vaporizers, but they target different priorities. Sticky Brick Junior is usually the lower-cost pick at $150, around $199 below Tinymight 2. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
22
Different Specs
20
Shared Specs
2
Overall Overlap
9%
Shared Traits
A quick snapshot of the specs people usually care about first.
Sticky Brick Junior
$150
Tinymight 2
$349
Sticky Brick Junior is typically around $199 lower.
Sticky Brick Junior
190g
Tinymight 2
186g
Weight is close enough that portability is likely similar.
Sticky Brick Junior
Convection
Tinymight 2
Convection
Both devices use a similar heating approach.
Top specs where these two devices diverge.
Price (USD)
Sticky Brick Junior
$150
Tinymight 2
$349
Temperature Range
Sticky Brick Junior
N/A
Tinymight 2
140°C - 250°C
Battery Type
Sticky Brick Junior
None
Tinymight 2
18650
Battery Capacity
Sticky Brick Junior
N/A
Tinymight 2
3000mAh
Battery Life
Sticky Brick Junior
N/A
Tinymight 2
5-8 sessions
Charging
Sticky Brick Junior
N/A
Tinymight 2
USB-C
Dimensions
Sticky Brick Junior
114x76x25mm
Tinymight 2
88x61x37mm
Weight
Sticky Brick Junior
190g
Tinymight 2
186g
Power Adjustment
Sticky Brick Junior
Manual
Tinymight 2
Single Dial
Brand
Sticky Brick Junior
Sticky Brick Labs
Tinymight 2
Tinymight
Direct comparison of every spec from each device profile.
| Specification | Sticky Brick Junior | Tinymight 2 |
|---|---|---|
| Price (USD) | $150 | $349 |
| Device Type | Portable | Portable |
| Heating Type | Convection | Convection |
| Heat Up Time | — | ~3 seconds |
| Temperature Range | N/A | 140°C - 250°C |
| Chamber Capacity | ~0.2g | — |
| Battery Type | None | 18650 |
| Battery Capacity | N/A | 3000mAh |
| Battery Life | N/A | 5-8 sessions |
| Charging | N/A | USB-C |
| Charge Time | N/A | — |
| Dimensions | 114x76x25mm | 88x61x37mm |
| Weight | 190g | 186g |
| Power Adjustment | Manual | Single Dial |
| Brand | Sticky Brick Labs | Tinymight |
| Adjustable Airflow | Yes | No |
| Body Material | — | American Walnut wood |
| Country of Manufacture | United States (USA) | Finland |
| Manufacturer | — | JTJS Products OY |
| Release Date | 2019 | 2022 |
| Session Style | On-Demand | Both |
| Warranty | Lifetime | 3 years |
The biggest practical difference is price tier: the Sticky Brick Junior sits at $150 while the Tinymight 2 is $349, a gap of about $199 that puts them in different buying brackets.
Sticky Brick Junior is the cheaper option at $150 compared with $349 for the Tinymight 2, about $199 less. Live retailer pricing can shift, so confirm before buying.
Tinymight 2 uses 18650, so you can carry spares for back-to-back days. The Sticky Brick Junior has a built-in battery you can't swap on the go.
Sticky Brick Junior controls heat with manual, while the Tinymight 2 uses single dial. Both let you change temperature, just with different levels of precision.
Sticky Brick Junior's spec sheet lists N/A; the Tinymight 2 lists 5-8 sessions. The two manufacturers measure battery life differently here, so direct comparison isn't straightforward.
Tinymight 2 is the better fit for microdosing in our database, typically thanks to a smaller chamber, finer temperature control, or both.
Across the 22 specs we line up, they share 2 and differ on 20, an overlap of about 9%. The differences are concentrated in the areas the spec table highlights with a marker.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.