Price (USD)
Sticky Brick Junior edgeFurna
$175
Sticky Brick Junior
$150
Sticky Brick Junior is typically around $25 lower.
Vaporizer Comparison
Side-by-side specs, pricing context, and clear decision guidance.
Furna
Furna $175
Sticky Brick Junior
Sticky Brick Labs $150
Furna and Sticky Brick Junior are both portable vaporizers, but they target different priorities. Sticky Brick Junior is usually the lower-cost pick at $150, around $25 below Furna. Session style, airflow, and extraction behavior will matter more than raw spec sheet numbers here.
Specs Compared
22
Different Specs
21
Shared Specs
1
Overall Overlap
5%
Shared Traits
A quick snapshot of the specs people usually care about first.
Furna
$175
Sticky Brick Junior
$150
Sticky Brick Junior is typically around $25 lower.
Furna
Conduction
Sticky Brick Junior
Convection
Heating style differs, which can impact flavor and extraction behavior.
Top specs where these two devices diverge.
Price (USD)
Furna
$175
Sticky Brick Junior
$150
Heating Type
Furna
Conduction
Sticky Brick Junior
Convection
Temperature Range
Furna
160°C - 215°C (320°F - 420°F)
Sticky Brick Junior
N/A
Chamber Capacity
Furna
~0.23g
Sticky Brick Junior
~0.2g
Battery Type
Furna
Internal 18650
Sticky Brick Junior
None
Battery Capacity
Furna
3500mAh
Sticky Brick Junior
N/A
Battery Life
Furna
15-20 sessions
Sticky Brick Junior
N/A
Charging
Furna
Micro-USB
Sticky Brick Junior
N/A
Charge Time
Furna
<2.5 hours
Sticky Brick Junior
N/A
Power Adjustment
Furna
Digital
Sticky Brick Junior
Manual
Direct comparison of every spec from each device profile.
| Specification | Furna | Sticky Brick Junior |
|---|---|---|
| Price (USD) | $175 | $150 |
| Device Type | Portable | Portable |
| Heating Type | Conduction | Convection |
| Heat Up Time | 20-30 Seconds | — |
| Temperature Range | 160°C - 215°C (320°F - 420°F) | N/A |
| Chamber Capacity | ~0.23g | ~0.2g |
| Battery Type | Internal 18650 | None |
| Battery Capacity | 3500mAh | N/A |
| Battery Life | 15-20 sessions | N/A |
| Charging | Micro-USB | N/A |
| Charge Time | <2.5 hours | N/A |
| Dimensions | — | 114x76x25mm |
| Weight | — | 190g |
| Power Adjustment | Digital | Manual |
| Chamber Material | Stainless Steel | — |
| Concentrate Support | Yes | — |
| Brand | Furna | Sticky Brick Labs |
| Adjustable Airflow | No | Yes |
| Country of Manufacture | — | United States (USA) |
| Release Date | 2020 | 2019 |
| Session Style | — | On-Demand |
| Warranty | 2 years | Lifetime |
The biggest practical difference is heating approach: Furna runs conduction while Sticky Brick Junior runs convection. That changes flavor delivery, vapor density, and how the device responds to slow versus fast draws.
Sticky Brick Junior is the cheaper option at $150 compared with $175 for the Furna, about $25 less. Live retailer pricing can shift, so confirm before buying.
Furna uses conduction heating, while the Sticky Brick Junior uses convection. Heating style influences flavor profile, vapor density, and how forgiving the device is to draw technique.
Furna has the larger chamber at ~0.23g, versus ~0.2g on the Sticky Brick Junior. A bigger bowl means fewer reloads on long sessions; a smaller one suits microdosing and quicker bowls.
Furna controls heat with digital, while the Sticky Brick Junior uses manual. Furna gives you finer per-degree control.
Furna's spec sheet lists 15-20 sessions; the Sticky Brick Junior lists N/A. The two manufacturers measure battery life differently here, so direct comparison isn't straightforward.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.