Price (USD)
XVape Fog Pro edgeBoundless Tera V3
$155
XVape Fog Pro
$120
XVape Fog Pro is typically around $35 lower.
Vaporizer Comparison
Boundless Tera V3
XVape Fog Pro
Side-by-side specs, pricing context, and clear decision guidance.
Boundless Tera V3 and XVape Fog Pro are both portable / battery swap vaporizers, but they target different priorities. XVape Fog Pro is usually the lower-cost pick at $120, around $35 below Boundless Tera V3. XVape Fog Pro has the quicker listed heat-up profile, which can matter for shorter sessions.
Specs Compared
18
Different Specs
17
Shared Specs
1
Overall Overlap
6%
Shared Traits
A quick snapshot of the specs people usually care about first.
Boundless Tera V3
$155
XVape Fog Pro
$120
XVape Fog Pro is typically around $35 lower.
Boundless Tera V3
20 - 30 Seconds
XVape Fog Pro
~15 seconds
XVape Fog Pro has the quicker listed heat-up profile.
Boundless Tera V3
Convection
XVape Fog Pro
Convection
Both devices use a similar heating approach.
Top specs where these two devices diverge.
Price (USD)
Boundless Tera V3
$155
XVape Fog Pro
$120
Device Type
Boundless Tera V3
Portable
XVape Fog Pro
—
Heat Up Time
Boundless Tera V3
20 - 30 Seconds
XVape Fog Pro
~15 seconds
Temperature Range
Boundless Tera V3
60°C-260°C
XVape Fog Pro
100-220℃ (212-428℉)
Chamber Capacity
Boundless Tera V3
—
XVape Fog Pro
~0.3 grams
Battery Type
Boundless Tera V3
Dual 18650
XVape Fog Pro
18650
Battery Capacity
Boundless Tera V3
—
XVape Fog Pro
3200mAh
Charging
Boundless Tera V3
Micro-USB
XVape Fog Pro
USB-C
Charge Time
Boundless Tera V3
~2.5 hours
XVape Fog Pro
—
Dimensions
Boundless Tera V3
120x40x25mm
XVape Fog Pro
—
Direct comparison of every spec from each device profile.
| Specification | Boundless Tera V3 | XVape Fog Pro |
|---|---|---|
| Price (USD) | $155 | $120 |
| Device Type | Portable | — |
| Heating Type | Convection | Convection |
| Heat Up Time | 20 - 30 Seconds | ~15 seconds |
| Temperature Range | 60°C-260°C | 100-220℃ (212-428℉) |
| Chamber Capacity | — | ~0.3 grams |
| Battery Type | Dual 18650 | 18650 |
| Battery Capacity | — | 3200mAh |
| Charging | Micro-USB | USB-C |
| Charge Time | ~2.5 hours | — |
| Dimensions | 120x40x25mm | — |
| Power Adjustment | — | Digtal |
| Oven Type | Stainless Steel | — |
| Brand | Boundless Technology | — |
| Chamber Material | — | Ceramic |
| Haptic Feedback | — | Yes |
| Manufacturer | — | TopGreen Technology Co |
| Replaceable Battery | — | Yes |
There's no single headline gap. The differences are spread across 17 smaller spec rows rather than concentrated in one place. The spec table below marks each row that differs.
XVape Fog Pro is the cheaper option at $120 compared with $155 for the Boundless Tera V3, about $35 less. Live retailer pricing can shift, so confirm before buying.
XVape Fog Pro reaches session-ready temperature in ~15 seconds, while the Boundless Tera V3 takes 20 - 30 Seconds. That's roughly 10 seconds quicker on the XVape Fog Pro, which is useful if you want shorter, on-demand sessions.
Boundless Tera V3 is the better fit for microdosing in our database, typically thanks to a smaller chamber, finer temperature control, or both.
XVape Fog Pro charges over USB-C; the Boundless Tera V3 uses a Micro-USB port. USB-C means one fewer cable to keep around if your phone and laptop already use it.
Jump into the comparison hub to pick any two devices and open a canonical side-by-side page.