Arizer Air Max

Arizer calls the Air MAX layout an isolated air path, and that decides where the mess ends up. Vapour only touches the borosilicate Glass Aroma Tube you packed, so resin collects in the stem rather than inside the unit, which matches what we found in our review.

1. Empty the tube soon after a session. Knock the spent load from the bowl end of the 70mm Glass Aroma Tube and run the stainless steel stirring tool around the inside. Warm resin lifts away easily and sets hard once cool. Let the glass reach room temperature before it meets water, because Arizer warns that a sudden temperature change will crack borosilicate, and glass is the one item excluded from the 2 year warranty.

2. Soak the glass rather than scrubbing it. Arizer's instruction for the Air MAX is a couple of hours in isopropyl alcohol followed by a hot water rinse. The same treatment suits the 70mm tube, the 14mm frosted tube and the glass aroma dish. Stubborn staining only needs a second soak. Every piece has to be bone dry before it goes near the heater again.

3. Replace the steel screens instead of saving them. The four stainless filter screens sit at the bowl end of the tube and pack with fine particles long before the glass looks bad, which tightens the draw. Arizer sells them in 6 and 50 piece packs, so swapping is cheap. A coarser grind with no screen fitted is also a valid option here.

4. Keep liquid out of the heater. A cotton swab, damp with alcohol but never dripping, handles the heater collar. Nothing should be poured or dropped into the unit itself. If a tube suddenly feels tight going in, that is usually residue rather than damage: run the Air MAX at 200°C for a minute or two and it will seat properly again.

5. Check the base and the port. Unscrew the battery cap occasionally, wipe the 26650 contacts and brush grit from the threads, matching positive and negative when the cell goes back in. Keep the USB-C port clear of pocket lint. A spare 26650 wants storing at around half charge, not full and not flat.

6. Treat water pipe sessions carefully. With the frosted 14mm tube in a bubbler the display inverts by itself, but water must not splash up into the heater, and the device should not be left hanging upside down, since its 160 grams strain the glass. Stand it upright between draws.

Arizer asks only for a glass clean after numerous sessions. Daily users tend to land on roughly weekly, and a second tube keeps the Air MAX running while the first soaks.

The Air Max features hybrid heating for efficient extraction and ranks among best convection vaporizers for its all-glass vapor path. It's an excellent session vaporizer that's also easy to clean thanks to its simple glass stem design.

With its long battery life and replaceable battery, the Air Max excels for outdoor adventures and heavy use. The included frosted glass tube fits 14mm water pipes natively, making it compatible with most water pipe setups.

Learn about optimal vaping temperatures to get the most from the Air Max's precise digital controls. For those new to Arizer products, see our beginner's guide and explore our complete Arizer vaporizers collection.